Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920955BTC
In stock
Abus
Abus 55HB/40-63 KA keyed padlock alike
Brass-body padlock with a 1/4-inch steel shackle, 4-pin cylinder and keyed-alike convenience for multiple locks
- TypeTraffic & Parking Lot
- Solid brass body resists corrosion
- Hardened steel shackle withstands cutting attempts
- Keyed-alike convenience simplifies multi-lock management
- Weather-resistant construction performs outdoors
- Compact 40 mm width fits tight hasps
Brass padlock for traffic and parking areas
This Abus 55HB/40-63 KA padlock is built for traffic and parking lot applications. The solid brass body resists corrosion while the steel shackle provides cut resistance. Keyed-alike convenience lets one key open multiple locks across a site. It suits facility managers securing gates, barriers or equipment enclosures.
1/4 inch shackle diameter and 2 1/2 inch clearance
The shackle measures 1/4 inch thick with a 2 1/2 inch internal height and 13/16 inch internal width. These dimensions decide whether the lock fits your hasp, chain link or gate latch. Verify the opening size before ordering because the shackle cannot be swapped or shortened.
Simple snap-on installation with no rekeying
Push the shackle into the body until it clicks; the 4-pin tumbler cylinder is factory set and not rekeyable. Interchangeable cores are not supported so cylinders cannot be upgraded later. The long shackle clears thick hasps but may snag on tight clearances if the mounting point is recessed.
Highlights
- Solid brass body resists corrosion
- Hardened steel shackle withstands cutting attempts
- Keyed-alike convenience simplifies multi-lock management
- Weather-resistant construction performs outdoors
- Compact 40 mm width fits tight hasps
Specifications
| Brand | ABUS |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
How much clearance does the 2 1/2 in shackle height give when locking a hasp?
The 2 1/2 in shackle height provides enough reach for thick hasps or chain links while the 13/16 in shackle width fits standard padlock eyes.
What does the 1/4 in shackle diameter mean for cut resistance?
A 1/4 in steel shackle resists bolt cutters better than thinner shackles yet still fits common 1/4 in padlock eyes on gates and lockers.
Will the 1 1/2 in wide brass body fit my existing mounting bracket?
The rectangular brass body measures 1 1/2 in wide by 1 21/64 in high by 33/64 in thick, so check those dimensions against your bracket opening.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
