ABLEGRID
ABLEGRID White 98ft BNC Power Cable 600TVL
White all-in-one BNC video and power cable extends a 600TVL security bullet camera up to 98 feet
- Battery TypeUPS
- 98 ft single cable runs video and power to cameras
- White jacket blends with light-coloured walls and ceilings
- Pre-made BNC and power connectors need no crimping tools
- Compatible with Q-See QM6006B 600TVL bullet cameras
- 100 ft specification covers the full 98 ft installed length
ABLEGRID White 98ft BNC Power Cable
This 98ft pre-made all-in-one cable carries both video and power to compatible security bullet cameras. It is built for installers who need a single white cord to reach distant mounting points without separate runs. The BNC connectors match the camera and DVR ports shown in the product images.
Passive cable thermals noise and power
As a passive copper cable it generates no heat, emits no noise and draws no power of its own. The only electrical load comes from the camera it supplies, so system thermals and acoustic profile stay unchanged. No active cooling or external supply is required for the cable itself.
Replaces shorter or damaged BNC runs
It replaces shorter factory leads or worn cables that limit camera placement or show signal loss. The 98ft length lets you bridge longer distances between camera and recorder in one piece. Buyers who need runs beyond 98ft or a different connector type will need another solution.
Highlights
- 98 ft single cable runs video and power to cameras
- White jacket blends with light-coloured walls and ceilings
- Pre-made BNC and power connectors need no crimping tools
- Compatible with Q-See QM6006B 600TVL bullet cameras
- 100 ft specification covers the full 98 ft installed length
Specifications
| Brand | ABLEGRID |
|---|---|
| Battery Type | UPS |
Questions about this item
How do I connect the pre-made BNC and power ends to my Q-See QM6006B camera and DVR?
Run the single 98 ft cable from the camera location to the recorder, plug the BNC connector into the video input and the power plug into the camera’s power socket — the step most installers miss is securing the BNC twist-lock so it cannot pull loose.
What part of this all-in-one cord will need replacement first during long-term outdoor use?
The white jacket and BNC contacts are the wear points; after several seasons of sun and temperature cycling the insulation can brittle and the centre pin may oxidise, requiring a new 98 ft run.
At what distance does video quality start to degrade on this 98 ft run with a 600TVL camera?
The 98 ft length stays within the typical passive limit for 600TVL signals, so the first limit you hit is the cable’s own attenuation — beyond this run you would need a video balun or powered extender.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
FT Champs
FT Champs Vintage Collection Navy 20in Hardside Camera Case 360 Wheels USB Port
$104.99
0.00121443BTC
In stock
