We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 150-foot BNC extension cable coiled, pre-made video and power cord for security cameras

ABLEGRID

ABLEGRID White 150ft BNC Extension Cable for Swann WMT-HOMECAM1

SKU CH-DWMD-NP6B2

White 147 ft BNC extension cable carries video and power to compatible Swann security cameras indoors or outdoors

  • Battery TypeUPS
  • 150 ft reach lets cameras sit far from the recorder
  • 147 ft pre-made BNC video and power cord installs in one step
  • White jacket blends with light walls and ceilings indoors or out
  • Compatible with Swann WMT-HOMECAM1 for direct plug-in use
  • ABLEGRID branded cable ships new in sealed packaging

White 150 ft BNC Extension Cable

This 147 ft pre-made all-in-one cable carries video and power for Swann WMT-HOMECAM1 security cameras indoors or outdoors. The white jacket blends with light-coloured walls and eaves. It replaces shorter factory leads so the camera can reach a distant recorder or power outlet. Installers and DIY owners gain flexible placement without joining multiple cords.

Passive copper construction

The cable draws no power of its own and adds no active electronics to the signal path. Voltage drop over the full length depends on the camera’s current draw and the supply voltage at the source. No fan, heat sink or power adapter is included, so thermal load and acoustic noise are effectively zero. The installer must verify that the camera receives adequate voltage at the far end.

Simple plug-and-play fit

Male and female BNC connectors plus integrated power plugs mate directly with the camera and DVR or power supply. No crimping tools, solder or separate video and power runs are required. The single jacket reduces cable clutter along walls, conduits or fence lines. Buyers needing longer runs, different connector types or shielded twisted-pair for IP cameras will need a different solution.

Highlights

  • 150 ft reach lets cameras sit far from the recorder
  • 147 ft pre-made BNC video and power cord installs in one step
  • White jacket blends with light walls and ceilings indoors or out
  • Compatible with Swann WMT-HOMECAM1 for direct plug-in use
  • ABLEGRID branded cable ships new in sealed packaging

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

How do I install the 150ft BNC extension cable on my Swann WMT-HOMECAM1 without signal loss?

Route the pre-made all-in-one BNC video and power cable from the camera to the DVR, connect each BNC and power plug firmly, and avoid tight bends or running parallel to mains power to prevent interference.

What maintenance will the 147ft BNC extension cable need over time?

Inspect the white jacket annually for UV cracking or water ingress at the connectors, reseat the BNC and power plugs if the picture flickers, and replace the cable if the insulation becomes brittle.

What limit appears first when the 150ft cable runs continuously on a Swann WMT-HOMECAM1?

Voltage drop over the 147ft run reaches the camera’s minimum input first, causing night-vision LEDs to dim or the unit to reboot before video attenuation becomes noticeable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.