We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ABLEGRID

ABLEGRID CS-1201000 12V 1A 5.5x2.5mm charger

SKU CH-PS2P-XWA1Z MPN CS-1201000

Supplies 12V 1A DC power through a 5.5x2.5mm barrel tip from 100-240V AC input

  • Battery TypeUPS
  • Worldwide AC input from 100 to 240 volts
  • Stable 12 volt DC output at 1 ampere
  • 5 by 2.5 mm barrel tip for secure fit
  • Over-voltage and over-heat protection built in
  • CE FCC RoHS certified for safety compliance

Purpose and fit

The ABLEGRID CS-1201000 is a 12V 1A AC adapter with a 5.5x2.5mm barrel tip. It suits devices that require this exact voltage and connector size, such as certain UPS units or small electronics. Buyers needing a different output voltage, a higher current rating or another tip geometry should look elsewhere.

Upgrade context

This charger replaces a lost or damaged original supply for compatible hardware. The jump is worthwhile when the old unit no longer delivers stable 12V output or its tip is worn, and the replacement matches the original specifications listed on the device label.

Sustained operation

The adapter accepts 100-240V AC at 50-60Hz for worldwide use and includes over-voltage and over-heat protection. Under continuous load it relies on passive cooling, so adequate ventilation is required; the supplier advises against placing it on soft surfaces during extended use.

Highlights

  • Worldwide AC input from 100 to 240 volts
  • Stable 12 volt DC output at 1 ampere
  • 5 by 2.5 mm barrel tip for secure fit
  • Over-voltage and over-heat protection built in
  • CE FCC RoHS certified for safety compliance

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

What barrel-tip dimensions does the CS-1201000 require?

The charger uses a 5.5 mm outer diameter and 2.5 mm inner diameter barrel tip for DC output.

How is the ABLEGRID CS-1201000 installed, and what step is often missed?

Plug the AC side into a 100-240 V, 50-60 Hz outlet, then connect the barrel tip; the step often missed is verifying the device needs exactly 12 V 1 A DC with centre-positive polarity before powering on.

What ongoing care does the CS-1201000 need?

Keep the adapter in a ventilated, low-humidity area and do not place it on soft surfaces; unplug it if the housing becomes unusually hot or shows any damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.