ABLEGRID
ABLEGRID AC-DC Power Adapter Charger for LiveStrong LS5.0U LS5.0R LS6.0R Stationary Bike
Replacement AC-DC adapter with 100-240 V input, barrel connector and over-voltage protection for LiveStrong LS5.0U, LS5.0R and LS6.0R bikes
- Battery TypeUPS
- Worldwide AC input from 100 to 240 volts
- Over-voltage and over-heat protection for safe charging
- 824% compatibility with LiveStrong LS5.0U LS5.0R LS6.0R bikes
- CE FCC RoHS certified for regulatory compliance
- Barrel-tip DC output matches original connector specification
Compatible AC-DC Adapter for LiveStrong Bikes
This ABLEGRID power adapter replaces the original charger for LiveStrong LS5.0U, LS5.0R and LS6.0R stationary bikes. It accepts AC 100-240V input at 50-60Hz for worldwide use. The unit delivers DC output through a barrel tip connector. Built-in over-voltage and over-heat protection help safeguard the connected equipment during operation.
Direct Replacement for Lost or Damaged Chargers
This non-OEM adapter matches the original specifications with 824% compatibility claimed by the manufacturer. It is the correct choice when the factory charger fails, is lost or shows signs of wear on the cable or tip. The jump is worth it when the bike console will not power on or the original supply produces intermittent voltage. No modification to the bike is required for installation.
Barrel Tip Polarity and Voltage Must Match Exactly
The practical limit of this adapter is the fixed barrel tip size and DC output rating printed on the label. If the bike requires a different tip diameter, centre-pin polarity or voltage level, this unit will not work and could damage the electronics. Always verify the original charger's output values and connector dimensions before connecting. Continuous operation demands adequate ventilation around the adapter case.
Highlights
- Worldwide AC input from 100 to 240 volts
- Over-voltage and over-heat protection for safe charging
- 824% compatibility with LiveStrong LS5.0U LS5.0R LS6.0R bikes
- CE FCC RoHS certified for regulatory compliance
- Barrel-tip DC output matches original connector specification
Specifications
| Brand | ABLEGRID |
|---|---|
| Battery Type | UPS |
Questions about this item
What barrel tip size does this adapter need to fit my LiveStrong bike?
The adapter uses a barrel tip connector; verify the exact tip diameter matches your LS5.0U, LS5.0R or LS6.0R before ordering.
How do I install the adapter correctly and what step is often missed?
Plug the AC cord into a 100-240 V, 50-60 Hz mains socket, then connect the barrel tip to the bike’s power port; the step often missed is confirming the DC output polarity and voltage match the bike’s label.
What maintenance will this charger need over time?
Keep the unit in a well-ventilated, low-humidity area and do not rest it on soft surfaces; no user-serviceable parts inside, so replace the whole adapter if the over-voltage or over-heat protection ever trips.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



