We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with barrel tip connector and power cord

ABLEGRID

ABLEGRID AC Adapter for Wisecomm HL-12/2-8E6S ADT121000

SKU CH-NRYQ-FWT4D

Replacement power adapter for Wisecomm HL-12/2-8E6S CCTV cameras with 12 V DC output and barrel connector

  • Battery TypeUPS
  • Worldwide AC input from 100 to 240 volts
  • 986 percent compatibility with the original Wisecomm unit
  • Over-voltage and over-heat protection built in
  • CE FCC RoHS certified for safety compliance
  • Non-OEM replacement charger ready for CCTV camera use

ABLEGRID AC Adapter for Wisecomm HL-12

This AC adapter replaces the original power supply for Wisecomm HL-12/2-8E6S ADT121000 CCTV cameras. It is built for installers and system owners who need a direct, non-OEM replacement that matches the factory voltage and barrel-tip connector. The unit delivers worldwide AC 100-240 V input at 50-60 Hz and provides a regulated DC output with over-voltage and over-heat protection. Buyers who require a different tip polarity or a higher current rating should verify specifications before ordering.

Upgrade from a failed or missing factory brick

The adapter serves as a drop-in substitute when the original Wisecomm supply is lost, damaged or no longer holds regulation. The jump is worth it when the existing unit shows intermittent power, audible coil whine or physical damage to the cable or tip. It restores reliable 12 V DC operation without rewiring the camera or changing the mounting hardware. Systems that need PoE injection, redundant feeds or a different voltage rail cannot use this adapter.

Steady DC output under continuous camera load

Designed for 24/7 surveillance duty, the switching supply maintains its rated DC voltage during sustained recording cycles rather than only in short bursts. Over-voltage and over-heat circuits engage automatically if the load or ambient temperature exceeds safe limits, protecting both the adapter and the connected camera. Adequate ventilation is required during prolonged operation; the unit should not be placed on heat-trapping surfaces or enclosed without airflow.

Highlights

  • Worldwide AC input from 100 to 240 volts
  • 986 percent compatibility with the original Wisecomm unit
  • Over-voltage and over-heat protection built in
  • CE FCC RoHS certified for safety compliance
  • Non-OEM replacement charger ready for CCTV camera use

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

What barrel-tip size does the ABLEGRID AC adapter use for the Wisecomm HL-12/2-8E6S?

The adapter ships with a barrel tip; verify the tip diameter matches the camera’s DC jack before connecting.

How do I install the adapter, and what step is often missed?

Plug the barrel tip firmly into the camera’s DC input, then connect the AC cord to a 100-240 V, 50-60 Hz outlet; the step often missed is confirming the tip polarity and size match the device.

What maintenance will this power supply need over time?

Keep the unit in a ventilated, low-humidity area and do not place it on soft surfaces; no user-serviceable parts are inside, so replace the adapter if output becomes unstable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.