We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with barrel connector tip

ABLEGRID

ABLEGRID AC Adapter for NETGEAR WN2000RPT WN802T Charger

SKU CH-C3NH-EEKNX

Replacement power supply for NETGEAR WN2000RPT and WN802T with 100-240V AC input and safety protections

  • Battery TypeUPS
  • Compatible with NETGEAR WN2000RPT and WN802T models
  • Worldwide AC 100-240V input at 50-60Hz frequency
  • CE FCC RoHS certified with over-voltage and over-heat protection
  • 651% compatibility with original equipment specifications
  • Barrel tip connector for secure DC power delivery

Replacement charger for NETGEAR WN2000RPT and WN802T

This ABLEGRID AC adapter supplies DC power to NETGEAR WN2000RPT and WN802T networking devices. It accepts worldwide AC input from 100 to 240 volts at 50 or 60 hertz. The barrel tip connector matches the original equipment requirement. It is intended for owners who need a new mains power supply for these specific models.

Upgrading from a lost or faulty original supply

The unit replaces a missing or damaged NETGEAR power brick when the original is no longer available. Built-in over-voltage and over-heat protection guard the connected device during operation. CE, FCC and RoHS certifications confirm compliance with safety standards. The jump is worth it when the original charger has failed and a compatible non-OEM alternative is required.

Simple plug-in installation with tip verification

Installation consists of connecting the barrel tip to the device and plugging the mains lead into a wall socket. The critical step is confirming that the DC output voltage and barrel tip dimensions match the device label before first use. Keep the adapter in a ventilated area during extended operation and avoid placing it on soft surfaces. No tools or configuration are needed beyond the physical connection.

Highlights

  • Compatible with NETGEAR WN2000RPT and WN802T models
  • Worldwide AC 100-240V input at 50-60Hz frequency
  • CE FCC RoHS certified with over-voltage and over-heat protection
  • 651% compatibility with original equipment specifications
  • Barrel tip connector for secure DC power delivery

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

What barrel-tip size does the ABLEGRID adapter use for the NETGEAR WN2000RPT and WN802T?

The adapter uses a barrel-tip connector; verify the tip diameter and polarity against the original unit before ordering.

How do I install the adapter without triggering the over-voltage protection?

Plug the AC side into a 100-240 V 50-60 Hz mains socket first, then connect the barrel tip to the device; reversing the order can trip the protection circuit.

When should I replace the adapter if it runs continuously in a poorly ventilated spot?

Replace it if the case becomes excessively hot, emits unusual smells, or the over-heat protection shuts it down repeatedly during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.