We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ABLEGRID

ABLEGRID AC Adapter for Linksys EA3500 E2500 EA2700

SKU CH-QC05-PHS1G

AC power adapter for Linksys EA3500, E2500 and EA2700 routers with 100-240V input and built-in over-voltage and over-heat protection

  • Battery TypeUPS
  • Worldwide AC input from 100 to 240 volts
  • 274 percent compatibility with original Linksys routers
  • Over-voltage and over-heat protection built in
  • Barrel-tip connector sized for EA3500 E2500 EA2700 models
  • CE FCC RoHS certified for safe operation

Compatible Linksys Router Power Supply

This ABLEGRID AC adapter replaces the original power supply for Linksys EA3500, E2500 and EA2700 wireless media routers. It delivers the required DC output with a barrel tip connector for a secure fit. The unit accepts worldwide AC input from 100 to 240 volts at 50 or 60 hertz. It is a non-OEM replacement built to match the original specifications.

Upgrade When The Original Fails Or Is Lost

Swap to this adapter when the factory brick stops working, is misplaced or shows signs of wear such as frayed cables or intermittent power. The 274% compatibility claim indicates it meets the electrical needs of all three listed models. It is not suitable for routers outside the EA3500, E2500 and EA2700 series or for devices that require a different voltage, polarity or tip diameter.

Limits Of The Barrel Connector Interface

The barrel tip connector limits use to devices with the exact same jack size and centre-positive polarity. Worldwide input voltage covers 100 to 240 volts but the adapter cannot adjust output voltage for hardware that needs a different DC level. Over-voltage and over-heat protection shut the unit down under fault conditions, so it will not sustain loads beyond its rated output. Always verify the DC output and tip size before connecting.

Highlights

  • Worldwide AC input from 100 to 240 volts
  • 274 percent compatibility with original Linksys routers
  • Over-voltage and over-heat protection built in
  • Barrel-tip connector sized for EA3500 E2500 EA2700 models
  • CE FCC RoHS certified for safe operation

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

What router models does the barrel-tip connector fit?

The adapter is listed for Linksys EA3500, E2500 and EA2700 routers; verify the DC output and tip size on your unit before ordering.

How do I install the adapter without triggering the over-heat protection?

Plug the AC side into a 100-240 V, 50-60 Hz mains socket, connect the barrel tip to the router, and keep the unit in a ventilated area away from soft surfaces.

When should I replace the adapter if I run it continuously?

Replace it if the housing becomes unusually hot, the output voltage drops, or the over-voltage and over-heat protections activate repeatedly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.