We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black AC adapter with barrel connector for Channel Master DVR+ CM7500

ABLEGRID

ABLEGRID AC Adapter for Channel Master DVR+ CM7500

SKU CH-760A-HKXKG

Replacement AC adapter powers the Channel Master DVR+ CM7500 with 100-240 V worldwide input and over-voltage and over-heat protection

  • Battery TypeUPS
  • Worldwide AC input from 100 to 240 volts
  • Works with 50 and 60 hertz mains frequency
  • Built-in over voltage protection guards connected equipment
  • Over heat protection keeps the adapter running safely
  • Barrel tip connector matches Channel Master DVR+ CM7500

Direct replacement for CM7500 DVR+

The ABLEGRID AC adapter is built as a non-OEM power supply for the Channel Master DVR+ bundle CM7500 and CM7500BDL2. It delivers DC output through a barrel tip connector and accepts worldwide AC input from 100 to 240 volts at 50 to 60 hertz. The unit carries CE, FCC and RoHS certification and includes over-voltage and over-heat protection circuits.

Upgrades a failed or lost original charger

This adapter replaces the factory power brick when it fails, is misplaced or shows signs of wear such as intermittent power or damaged cables. The jump is worth it when the DVR+ will not power on reliably or when a spare is needed for a second location. No internal modification is required because the output specification and tip size match the original design.

Verify tip size and DC output before ordering

Check the label on the existing power supply to confirm the DC voltage, current rating and barrel tip dimensions match this adapter. Ensure the AC inlet on the DVR+ is clean and that the adapter will have adequate ventilation during long recording sessions. Do not place the unit on soft surfaces that could block airflow and cause overheating.

Highlights

  • Worldwide AC input from 100 to 240 volts
  • Works with 50 and 60 hertz mains frequency
  • Built-in over voltage protection guards connected equipment
  • Over heat protection keeps the adapter running safely
  • Barrel tip connector matches Channel Master DVR+ CM7500

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

What output connector does the ABLEGRID adapter use for the Channel Master DVR+ CM7500?

The adapter uses a barrel tip connector; verify the tip size matches the DVR+ CM7500 before connecting.

How do I safely install the adapter, and what common mistake should I avoid?

Plug the AC input into a 100-240V 50-60Hz outlet, then connect the barrel tip to the DVR+; do not skip confirming the DC output and tip size match the device.

What ongoing care does the power adapter need during long-term use?

Keep the unit in a well-ventilated, low-humidity area and avoid placing it on soft surfaces; stop use immediately if any abnormal heat or noise occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.