We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ABLEGRID

ABLEGRID AC Adapter Charger for Jebao DCP-3000 DCW-3000 DCT-4000

SKU CH-89RQ-9VBPS

Replacement AC adapter powers Jebao DCP-3000, DCW-3000 and DCT-4000 wave-maker controllers with 100-240 V worldwide input and barrel-tip output

  • Battery TypeUPS
  • Compatible with Jebao DCP-3000, DCW-3000, DCT-4000 controllers
  • Worldwide AC 100-240V input at 50-60Hz for universal use
  • Over-voltage and over-heat protection safeguards connected equipment
  • Includes AC/DC adapter plus mains power cable in box
  • CE, FCC and RoHS certified for safety compliance

Replacement power supply for Jebao wavemakers

This ABLEGRID AC adapter replaces the original mains unit for Jebao DCP-3000, DCW-3000 and DCT-4000 controllers. It delivers the required DC output through a barrel tip connector. The package includes the adapter and a detachable AC power cord. Buyers who need a different voltage or tip polarity cannot use this unit.

Thermals and electrical protection

The adapter accepts worldwide AC input from 100 to 240 volts at 50 or 60 Hz. Built-in over-voltage and over-heat protection circuits shut down the supply if limits are exceeded. The supplier recommends keeping the unit ventilated during extended use. No fan noise is produced because the design is passively cooled.

Build and daily use

CE, FCC and RoHS certifications confirm compliance with common safety and environmental standards. The barrel tip must match the controller socket exactly; verify dimensions before ordering. A standard mains cable is supplied for immediate connection. Users who require a locking connector or right-angle plug will need a different adapter.

Highlights

  • Compatible with Jebao DCP-3000, DCW-3000, DCT-4000 controllers
  • Worldwide AC 100-240V input at 50-60Hz for universal use
  • Over-voltage and over-heat protection safeguards connected equipment
  • Includes AC/DC adapter plus mains power cable in box
  • CE, FCC and RoHS certified for safety compliance

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

How do I install the ABLEGRID AC adapter for my Jebao DCP-3000 wave maker, and what is the common mistake?

Connect the barrel tip to the controller's DC input and plug the IEC cable into a 100-240V AC outlet; the common mistake is ordering without verifying the barrel tip size matches the controller's jack.

What maintenance or replacement will this power supply need over time?

Keep the adapter in a ventilated, low-humidity area and avoid placing it on soft surfaces; if the unit becomes excessively hot or shows physical damage, replace it to protect the DCT-4000 controller.

What limit appears first when the adapter runs continuously on a DCW-3000 pump?

The over-heat protection circuit activates first under sustained load, shutting the unit down until it cools; adequate airflow around the case prevents early thermal trips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.