We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black AC adapter with barrel connector and mains plug

ABLEGRID

ABLEGRID AC Adapter Charger for Danelectro The Eisenhower Fuzz Pedal

SKU CH-EZ2H-8DNY1

Replacement power supply for the Danelectro Eisenhower Fuzz pedal with worldwide AC input and built-in protection circuits

  • Battery TypeUPS
  • Worldwide 100-240V input works anywhere
  • 50-60Hz frequency matches mains supply
  • DC output powers the Eisenhower Fuzz pedal
  • Barrel tip connector fits the device
  • Over-voltage and over-heat protection guards equipment

Purpose-built replacement

The ABLEGRID AC adapter is a non-OEM power supply made to run the Danelectro The Eisenhower Fuzz pedal from a wall outlet. It accepts AC 100-240V at 50-60Hz so it works on mains power worldwide. The barrel tip connector matches the pedal's DC input requirement. Buyers who need a multi-pedal daisy-chain supply or an isolated brick for a full board cannot use this single-output unit.

Thermals and protection

Built-in over-voltage and over-heat protection circuits shut the adapter down if the output drifts outside safe limits. The supplier notes that the enclosure should be kept in a ventilated area and away from soft surfaces during extended sessions. No fan or active cooling is present, so the case relies on passive dissipation.

Build and daily use

The unit carries CE, FCC and RoHS certification marks and ships with a standard mains lead for immediate use. A single barrel-tip cable connects directly to the pedal, meaning no extra polarity adapters are required. The notice advises verifying the DC output voltage and tip dimensions before ordering to avoid a mismatch.

Highlights

  • Worldwide 100-240V input works anywhere
  • 50-60Hz frequency matches mains supply
  • DC output powers the Eisenhower Fuzz pedal
  • Barrel tip connector fits the device
  • Over-voltage and over-heat protection guards equipment

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

How do I install the ABLEGRID AC adapter for the Danelectro Eisenhower Fuzz pedal, and what step do people get wrong?

Plug the barrel tip into the pedal's power jack, then connect the AC cord to a 100-240V mains outlet at 50-60Hz. The step often missed is verifying the pedal requires a centre-negative DC barrel connector before powering on.

What maintenance or replacement will this adapter need later?

No routine maintenance is required. Replace the unit if the cable frays, the barrel tip becomes loose, or the over-voltage and over-heat protections trigger repeatedly during normal use.

What limit shows up first under sustained use?

The over-heat protection will activate first if ventilation is blocked, cutting output until the adapter cools. Ensure free airflow around the casing during extended sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.