ABLEGRID
ABLEGRID AC Adapter 12V for WD My DVR Expander
12V AC adapter powers compatible WD My DVR Expander hard drives with 100-240V worldwide input and over-voltage protection
- Battery TypeUPS
- Worldwide 100-240V input for flexible use
- 12V DC output with barrel tip for direct fit
- Over-voltage and over-heat protection safeguards the drive
- CE, FCC and RoHS certified for safety compliance
- 874% compatibility claim with original WD and TiVo expanders
Compatible Power Adapter
The ABLEGRID AC adapter supplies 12 V DC power to WD My DVR Expander drives including the WD5000F032 and WD10000F032 models. It accepts a worldwide AC input range of 100 to 240 V at 50 to 60 Hz and uses a barrel tip connector. CE, FCC and RoHS certifications are listed along with over voltage and over heat protection.
Replaces Original WD Supply
This non OEM unit replaces a lost or faulty factory adapter for the TiVo My DVR Expander series. The jump is worth it when the original brick fails or is missing and a 12 V barrel tip replacement with the same polarity is required. Compatibility is stated at 874 percent with the original specification.
Fits External Drive Enclosures
The adapter plugs directly into the expander enclosure and draws power from a standard mains socket. No internal wiring or case modification is needed. It frees the user from sourcing a proprietary WD part and keeps the external drive running from a compact wall wart. Buyers needing a different voltage or tip size should verify the DC output before ordering.
Highlights
- Worldwide 100-240V input for flexible use
- 12V DC output with barrel tip for direct fit
- Over-voltage and over-heat protection safeguards the drive
- CE, FCC and RoHS certified for safety compliance
- 874% compatibility claim with original WD and TiVo expanders
Specifications
| Brand | ABLEGRID |
|---|---|
| Battery Type | UPS |
Questions about this item
What barrel-tip size does the 12 V adapter need to match my WD My DVR Expander?
The adapter uses a barrel tip; verify the original unit's tip diameter before ordering to ensure a proper fit.
How do I install the adapter, and what step is often missed?
Plug the AC cord into a 100-240 V 50-60 Hz outlet, connect the barrel tip to the expander, then confirm the green LED lights — skipping the LED check is the common error.
What maintenance will the adapter need over time?
Keep vents clear and operate in a dry, ventilated area; if the housing becomes excessively hot or the output drops, replace the unit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



