We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC-DC adapter with barrel tip, labelled 9.6V output

ABLEGRID

ABLEGRID 9.6V AC-DC Adapter for Electro-Harmonix Signal Pad

SKU CH-8CE0-3NDE5

A 9.6 V mains adapter with 100–240 V input and over-voltage protection for the Electro-Harmonix Signal Pad

  • Battery TypeUPS
  • Worldwide AC input 100-240V 50-60Hz for universal use
  • 6V DC output with barrel tip matches Signal Pad exactly
  • Over voltage and over heat protection safeguards your pedal
  • CE FCC RoHS certified for safety and compliance
  • 101% compatibility guaranteed with original Electro-Harmonix power supply

Purpose-built replacement

The ABLEGRID 9.6V AC-DC adapter is a non-OEM power supply designed for the Electro-Harmonix Signal Pad passive attenuator. It accepts worldwide AC input from 100 to 240 volts at 50 to 60 hertz and delivers a DC barrel-tip output. Musicians and technicians needing a direct substitute for the original unit will find 101% compatibility claimed by the supplier.

Thermal and electrical protection

Built-in over-voltage and over-heat safeguards protect both the adapter and the connected pedal during normal operation. The supplier notes that prolonged use should be accompanied by suitable ventilation and that the unit must not be placed on skin-contact surfaces. No noise or power-draw figures are provided in the source data.

Single-unit package

The box contains one new AC-DC adapter power charger with no additional cables, mounting hardware or software. Users must verify that the DC output voltage and barrel tip dimensions match their device before ordering. All service enquiries are directed to the supplier’s customer-service email channel.

Highlights

  • Worldwide AC input 100-240V 50-60Hz for universal use
  • 6V DC output with barrel tip matches Signal Pad exactly
  • Over voltage and over heat protection safeguards your pedal
  • CE FCC RoHS certified for safety and compliance
  • 101% compatibility guaranteed with original Electro-Harmonix power supply

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

How do I install the ABLEGRID 9.6V adapter on my Electro-Harmonix Signal Pad, and what step do people often get wrong?

Plug the barrel tip firmly into the Signal Pad DC jack, then connect the mains lead to a 100-240V AC outlet. The step often missed is verifying the tip polarity and 9.6V DC output match the pedal before powering on.

What maintenance or replacement will this ABLEGRID adapter need over time?

No routine maintenance is required. Keep the unit in a ventilated, low-humidity area and avoid placing it on soft surfaces. Replace the adapter if the cable frays, the barrel tip loosens, or the over-voltage and over-heat protections activate repeatedly.

What limit appears first when the ABLEGRID adapter runs continuously at full load?

The over-heat protection triggers first under sustained maximum draw, shutting the unit down until it cools. Adequate airflow around the case prevents early thermal cycling and prolongs component life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.