ABLEGRID
ABLEGRID 65W 18.5V 3.5A Charger for HP 250 G1 255 G1
A 65 W 18.5 V 3.5 A AC adapter with worldwide 100-240 V input and barrel tip for HP 250 G1 and 255 G1 notebooks
- Battery TypeUPS
- Delivers 65W at 18.5V 3.5A for HP 250 G1 and 255 G1 notebooks
- Accepts worldwide AC 100-240V input at 50-60Hz for travel convenience
- Includes over-voltage and over-heat protection for safe operation
- CE, FCC and RoHS certified for regulatory compliance
- Supplied with AC adapter and power cable ready to use
65W 18.5V Replacement Charger
This ABLEGRID adapter supplies 65 watts at 18.5 volts and 3.5 amps for HP 250 G1 and 255 G1 notebooks. It accepts worldwide AC input from 100 to 240 volts at 50 to 60 hertz. The barrel tip connector matches the original laptop port. Over-voltage and over-heat protection are built in.
Upgrade from a failed or lost original
It replaces a broken, missing or worn-out factory charger so the laptop can power on and charge the battery again. The jump is worth it when the original unit no longer delivers stable voltage or the tip is damaged. No internal laptop repair is required, only a matching DC output and tip size.
Limits of the barrel-tip interface
The fixed barrel tip fits only laptops that use this exact connector size and polarity. It cannot charge devices that require USB-C Power Delivery or a different barrel diameter. The 65-watt ceiling means it will not fully support larger workstations that demand higher output. Input voltage auto-ranges from 100 to 240 volts for global travel.
Highlights
- Delivers 65W at 18.5V 3.5A for HP 250 G1 and 255 G1 notebooks
- Accepts worldwide AC 100-240V input at 50-60Hz for travel convenience
- Includes over-voltage and over-heat protection for safe operation
- CE, FCC and RoHS certified for regulatory compliance
- Supplied with AC adapter and power cable ready to use
Specifications
| Brand | ABLEGRID |
|---|---|
| Battery Type | UPS |
Questions about this item
What barrel-tip size does this 65 W charger use for the HP 250 G1 and 255 G1?
The adapter has a barrel tip; verify that the tip diameter and polarity match the original HP charger before connecting.
What is the correct way to plug in the 100-240 V AC input cable so the 18.5 V 3.5 A output is stable?
Connect the supplied power cord to the adapter first, then plug the cord into a 50-60 Hz mains socket; reversing the order can cause a brief spark at the barrel tip.
When should the charger be replaced if it runs warm during extended use on the HP 250 G1?
Replace the unit if the case becomes too hot to touch, the output voltage drops below 18.5 V, or the over-heat protection trips repeatedly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



