ABLEGRID
ABLEGRID 5 ft USB 3.0 Type A to Micro B cable blue
A 5 ft blue USB 3.0 Type A to Micro B cable supporting up to 4.8 Gbps data transfer
- SuperSpeed data up to 4.8 Gbps with twisted-pair wiring
- 5 ft length gives flexible camera-to-computer reach
- USB 3.0 Type A to Micro B fits Canon EOS 5DS and 7D Mark II
- Backwards compatible with USB 2.0 and 1.1 ports
- 28 AWG data and 24 AWG power conductors for reliable transfer
5 ft USB 3.0 Type A to Micro B cable
This 5 ft cable connects USB 3.0 Micro B devices to a standard Type A port. It uses 28 AWG data wires and 24 AWG power wires with twisted-pair construction to reduce crosstalk. The blue jacket identifies the cable in a busy kit. It supports SuperSpeed transfer rates up to 4.8 Gbps.
Suits cameras and legacy ports.
Photographers tethering a Canon EOS 5DS or 7D Mark II to a laptop will find the length and connector match ideal. The cord is also backwards compatible with USB 2.0 and USB 1.1 ports on older computers. Buyers needing a USB Type C connection or a longer reach should look at a different cable.
4.8 Gbps maximum data rate
The cable is rated for USB 3.0 SuperSpeed at 4.8 Gbps, which decides whether it meets your bandwidth needs. Actual throughput depends on the host controller and the connected device. If your workflow demands higher sustained throughput, this specification is the limiting factor.
Highlights
- SuperSpeed data up to 4.8 Gbps with twisted-pair wiring
- 5 ft length gives flexible camera-to-computer reach
- USB 3.0 Type A to Micro B fits Canon EOS 5DS and 7D Mark II
- Backwards compatible with USB 2.0 and 1.1 ports
- 28 AWG data and 24 AWG power conductors for reliable transfer
Specifications
| Brand | ABLEGRID |
|---|
Questions about this item
Does the 5 ft USB 3.0 cable generate heat or draw extra power during long transfers?
The cable uses 24 AWG power wire and 28 AWG data wire, so it carries standard USB 3.0 current without noticeable heat during all‑day use.
What port must my camera or computer already have for this cord to work?
You need a USB 3.0 Micro‑B port on the device and a USB Type‑A port on the host; the cable is also backward compatible with USB 2.0 and USB 1.1 ports.
Will this blue cable work with my older Canon EOS that only has USB 2.0?
Yes, the SuperSpeed USB 3.0 cable is backward compatible with USB 2.0 and USB 1.1, so it will sync data at the older port’s speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



