We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ABLEGRID 4-pin Mini DIN 12V 5V power adapter with 1.5 m cable

ABLEGRID

ABLEGRID 4-Pin Mini DIN 12V 5V Adapter for LaCie Porsche Design v.1

SKU CH-99JX-0KPKB

Replacement power adapter delivers 12 V and 5 V to LaCie Porsche Design v.1 drives with a 1.5 m cable

  • Worldwide 100-240 V input works anywhere
  • 12 V and 5 V dual output matches drive needs
  • Built-in over-voltage and over-heat protection safeguards hardware
  • 5 m cable gives flexible desk placement
  • CE FCC RoHS certified for safety compliance

Compatible Replacement for LaCie Porsche Design v.1

This ABLEGRID adapter replaces the original power supply for the LaCie Porsche Design v.1 hard drive. It delivers 12V and 5V DC output through a 4-pin Mini DIN connector. The unit accepts 100-240V AC input at 50-60Hz for worldwide use. It is a non-OEM accessory built to match the original specifications.

Upgrades an Aging or Lost Original Adapter

The adapter replaces a missing, damaged or unreliable factory brick that came with the drive. The jump is worth it when the original unit no longer powers the enclosure or shows signs of overheating. Built-in over-voltage and over-heat protection add a safety margin the old supply may lack. CE, FCC and RoHS certifications confirm compliance with current safety standards.

Simple Plug-In Installation With One Critical Check

Installation is straightforward: connect the 1.5 m DC cable to the drive, attach the included AC cord, and plug into mains power. The only common issue is a tip-size mismatch, so verify the connector dimensions against the drive before ordering. Ensure the adapter has adequate ventilation during extended use and keep it away from heat-sensitive surfaces.

Highlights

  • Worldwide 100-240 V input works anywhere
  • 12 V and 5 V dual output matches drive needs
  • Built-in over-voltage and over-heat protection safeguards hardware
  • 5 m cable gives flexible desk placement
  • CE FCC RoHS certified for safety compliance

Specifications

BrandABLEGRID

Questions about this item

Will the 4-pin mini DIN connector fit the LaCie Porsche Design v.1 power port?

The adapter uses a 4-pin mini DIN tip sized for the LaCie Porsche Design v.1; verify the DC output and tip size match your unit before ordering.

What is the correct way to plug in the 100-240V AC input and the 1.5 m DC cable?

Connect the supplied AC cord to the adapter’s IEC inlet, plug into a 50-60 Hz mains socket, then attach the 4-pin mini DIN plug to the drive — do not reverse the connections.

How should I maintain the adapter to avoid triggering over-heat protection?

Keep the unit in a ventilated area away from soft surfaces during extended use; if it becomes abnormally hot, unplug immediately and contact support.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.