We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ABLEGRID

ABLEGRID 24V 3A 72W AC/DC Adapter for 5050 3528 LED Strip

SKU CH-QNV6-2C6CD

Supplies 24 V DC at 3 A for 5050 and 3528 LED strips from 100-240 V AC input

  • Battery TypeUPS
  • Worldwide AC 100-240V input works anywhere
  • 72 W output powers 5050 and 3528 LED strips
  • 3 A steady current prevents voltage drop
  • Over-voltage and over-heat protection safeguards hardware
  • Barrel-tip connector ensures secure fit

24V 3A 72W LED Strip Power Supply

This ABLEGRID adapter converts 100-240V AC mains into 24V DC at up to 3 amps, delivering 72 watts for 5050 and 3528 SMD LED strips. It includes a barrel-tip connector and a detachable power cable for immediate installation. Over-voltage and over-heat protection guard the strip and the adapter during extended runs.

72-watt capacity with worldwide input

The unit handles continuous loads up to 72 watts, suitable for typical single-reel 5050 or 3528 installations. Input accepts 50-60Hz AC from 100 to 240 volts, so it works on global mains without a separate voltage selector. Output is fixed at 24V DC; strips requiring higher current or a different voltage will exceed the adapter’s headroom.

Barrel-tip connector and included cable

A standard barrel tip mates with common LED-strip controllers and dimmers; verify the tip diameter matches the strip’s jack before ordering. The supplied AC cable plugs directly into a wall outlet, leaving no external brick on the floor. Keep the adapter in a ventilated, low-humidity location and avoid placing it on heat-sensitive surfaces during long sessions.

Highlights

  • Worldwide AC 100-240V input works anywhere
  • 72 W output powers 5050 and 3528 LED strips
  • 3 A steady current prevents voltage drop
  • Over-voltage and over-heat protection safeguards hardware
  • Barrel-tip connector ensures secure fit

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

Will this 24V 3A adapter run my existing 5050 and 3528 LED strips together?

The adapter delivers 24 V at 3 A for a 72 W maximum, so it can power any 24 V strip combination that stays within that total wattage.

How can I confirm the adapter is working correctly after I connect it?

The unit includes over-voltage and over-heat protection; if the LED strip lights steadily without flicker or shutdown, the supply is operating as intended.

What comes in the box and what must I provide separately?

The package includes one AC/DC adapter and one power cable; you only need to supply the 24 V LED strip with a matching barrel tip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.