We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power brick with 1.5 m cord and detachable mains cable

ABLEGRID

ABLEGRID 19V AC DC Adapter for Seagate BlackArmor NAS 110 Charger

SKU CH-EKM1-DX3KM

Replacement 19V power adapter with 1.5 m cable and worldwide 100-240V input for Seagate BlackArmor NAS 110 storage

  • Worldwide AC input from 100 to 240 volts
  • 19 volt DC output matches Seagate BlackArmor NAS 110
  • Over voltage and over heat protection built in
  • 5 metre cable plus free mains cord included
  • Brand new non-OEM adapter ready for immediate use

19V AC/DC Adapter for Seagate BlackArmor NAS 110

This 19V power supply replaces the original charger for the Seagate BlackArmor NAS 110 1TB external hard drive. It delivers the required DC output for stable operation of the network-attached storage device. The unit includes a 1.5 metre power cord and a free mains cable for immediate use. It is built as a high-quality non-OEM replacement.

Worldwide 100-240V input with protection features

The adapter accepts AC input from 100V to 240V at 50Hz or 60Hz for global compatibility. Built-in over-voltage and over-heat protection safeguards the connected hardware during extended operation. The 5ft cable length allows flexible placement near the NAS unit. Proper ventilation is recommended during continuous use.

Direct replacement for lost

This unit serves owners of the Seagate BlackArmor NAS 110 who need a new 19VDC power source. It is not suitable for devices requiring 12VDC or a different connector tip size. Buyers must verify the output voltage and tip dimensions match the original adapter before purchase. The jump is worth it when the original supply is missing or damaged.

Highlights

  • Worldwide AC input from 100 to 240 volts
  • 19 volt DC output matches Seagate BlackArmor NAS 110
  • Over voltage and over heat protection built in
  • 5 metre cable plus free mains cord included
  • Brand new non-OEM adapter ready for immediate use

Specifications

BrandABLEGRID

Questions about this item

How do I install this 19V adapter on my Seagate BlackArmor NAS 110, and what step do people often miss?

Plug the barrel tip firmly into the NAS 110 power jack, connect the supplied cord to the adapter's AC inlet, then plug into a 100-240V 50-60Hz outlet; the step often missed is verifying the tip polarity and diameter match the unit before powering on.

What maintenance or replacement will this power supply need over time?

Keep the adapter in a ventilated, low-humidity area and off soft surfaces; no user-serviceable parts exist, so replace the entire unit if the cord frays, the housing cracks, or output becomes unstable.

What limit appears first when this charger runs continuously under load?

The over-heat protection will trip first during sustained use if airflow is restricted, shutting the adapter down until it cools; adequate ventilation prevents this thermal limit from being reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.