We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power adapter with 1.5m cable and detachable mains cord

ABLEGRID

ABLEGRID 12V 4A 48W Charger for LE-9702B ADP-4801

SKU CH-9SHW-NYB9Z

A 12 V 4 A 48 W AC DC adapter with 100-240 V input and a 1.5 m cord for LE-9702B ADP-4801 monitors

  • TypeCharger
  • Worldwide 100-240V input for universal travel use
  • 12V 4.0A 48W output matches LE-9702B ADP-4801 requirements
  • Over-voltage and over-heat protection safeguards connected equipment
  • 5m cable length gives flexible desktop placement
  • New non-OEM adapter includes free mains cord

Replacement power adapter for LE-9702B

This ABLEGRID charger supplies 12 V at 4 A for a total of 48 W. It is built as a non-OEM replacement that matches the original voltage and current ratings. The unit accepts a worldwide AC input of 100-240 V at 50-60 Hz. It is intended for users who need a direct substitute for a lost or failed monitor supply.

Output specification must match the monitor exactly

The adapter delivers a fixed 12 V DC output at 4.0 A. The barrel connector size is shown in the product images and must be verified against the device before ordering. Polarity, inner diameter and outer diameter are not interchangeable. Using a mismatched tip can prevent the monitor from powering on or cause damage.

Plug-in installation with a 1.5 m cable

The package includes the adapter and a detachable mains cord. Connection is a simple two-step process: attach the cord to the brick, then insert the barrel plug into the monitor. Ensure the connector seats fully and keep the unit ventilated during extended use. Over-voltage and over-heat protections are built in, but the supply should not be placed on soft surfaces that block airflow.

Highlights

  • Worldwide 100-240V input for universal travel use
  • 12V 4.0A 48W output matches LE-9702B ADP-4801 requirements
  • Over-voltage and over-heat protection safeguards connected equipment
  • 5m cable length gives flexible desktop placement
  • New non-OEM adapter includes free mains cord

Specifications

BrandABLEGRID
TypeCharger

Questions about this item

Will the 12 V 4 A output actually run my LE-9702B monitor without shutting down?

Yes, the adapter delivers 12 V DC at 4.0 A for a 48 W maximum, matching the monitor's original ADP-4801 requirement.

What does the 100-240 V 50-60 Hz input mean for daily use?

The wide-range input accepts mains voltages from 100 to 240 V at either 50 or 60 Hz, so the same charger works worldwide with only a plug adapter.

Will the 1.5 m cable and pictured tip fit my ADP-4801 unit?

The charger includes a 5 ft (1.5 m) DC cord and a detachable mains lead; the tip size is shown in the product photos for you to verify against your monitor's jack.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.