We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A compact black AC-DC adapter with barrel connector and mains plug

ABLEGRID

ABLEGRID 12V 1A Charger for Blackmagic Mini Converter Analog to SDI 2

SKU CH-D717-1STXK

Powers Blackmagic Mini Converter Analog to SDI 2 with 12V 1A output and worldwide 100-240V input

  • Battery TypeUPS
  • Worldwide AC input from 100 to 240 volts
  • Outputs 12 volts at 1 amp for the Mini Converter
  • Over-voltage and over-heat protection built in
  • CE, FCC and RoHS certified for safety
  • 101 percent compatibility with the original power supply

12 V 1 A replacement adapter

This ABLEGRID power supply delivers 12 V DC at 1 A from a 100-240 V AC source, making it a direct mains charger for the Blackmagic Mini Converter Analog to SDI 2. The barrel tip connector matches the unit’s DC input, and the adapter carries CE, FCC and RoHS certifications with over-voltage and over-heat protection built in. It is a non-OEM accessory designed for 101 % compatibility with the original supply.

When the original charger is lost or damaged

Replace the factory adapter when it fails, goes missing or shows cable wear that could interrupt a live production. The worldwide 50-60 Hz input means the same unit works on any mains voltage without a separate travel converter, so the swap is worthwhile whenever uptime matters more than sourcing an OEM spare.

Check barrel tip size and polarity before ordering

Verify that the converter’s DC jack accepts the supplied barrel tip and that the centre-positive polarity matches, because an incorrect fit will prevent power delivery or risk damage. Ensure the installation location allows free airflow around the adapter, as the safety notice advises keeping it ventilated and away from skin-contact surfaces during extended use.

Highlights

  • Worldwide AC input from 100 to 240 volts
  • Outputs 12 volts at 1 amp for the Mini Converter
  • Over-voltage and over-heat protection built in
  • CE, FCC and RoHS certified for safety
  • 101 percent compatibility with the original power supply

Specifications

BrandABLEGRID
Battery TypeUPS

Questions about this item

What tip size does the ABLEGRID charger use to connect to the Blackmagic Mini Converter Analog to SDI 2?

The charger uses a barrel tip connector. You must verify that the DC output and tip size match your converter before ordering.

How do I install the charger, and what step is often missed?

Connect the AC plug to a 100-240V, 50-60Hz mains outlet, then insert the barrel tip into the converter's DC input. The step often missed is confirming the tip size and polarity match the device.

What maintenance does the charger need over time?

Keep the unit in a well-ventilated area with suitable humidity during extended use. Do not place it on skin-contact surfaces. Stop use immediately if any abnormal condition occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.