We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White perforated thermal transfer label rolls in a carton

Abbott Label

Abbott Label Thermal Transfer Labels Perforated 3000 per roll 4 Rolls per Carton

SKU CH-G8B8-MMSMH

Perforated thermal-transfer labels on four rolls deliver 12,000 labels per carton for high-volume printing

  • 12,000 labels per carton from four 3,000-label rolls
  • Perforated every 7/8 inch for easy label separation
  • FDA CFR 175.105 compliant adhesive for indirect food contact
  • Service range from -65 °F to 200 °F (-54 °C to 93 °C)
  • Minimum application temperature of 30 °F for cold environments

General-purpose thermal-transfer labels

These perforated labels come on rolls sized for desktop or industrial thermal-transfer printers. Each roll holds 3000 labels and a carton contains four rolls for a total of 12000 labels. The permanent emulsion acrylic adhesive meets FDA CFR 175.105 for indirect food contact. They suit shipping, inventory and compliance labelling in warehouses, laboratories and food-handling areas.

Adhesive performance across temperature extremes

The adhesive is rated for a minimum application temperature of 30degF and a service range of -65degF to 200degF (-54degC to 93degC). It maintains strong initial tack and ultimate adhesion at low temperatures without losing high-speed converting reliability. No special environmental controls are required for normal indoor use.

Perforated format and roll geometry

A horizontal perforation every 7/8" allows clean separation of individual labels by hand or dispenser. Rolls have a 5" outer diameter and a 1" core to fit common thermal-transfer printers. The 51# basis-weight face stock feeds reliably through standard print mechanisms. Buyers needing continuous unperforated stock or a different core size should look elsewhere.

Highlights

  • 12,000 labels per carton from four 3,000-label rolls
  • Perforated every 7/8 inch for easy label separation
  • FDA CFR 175.105 compliant adhesive for indirect food contact
  • Service range from -65 °F to 200 °F (-54 °C to 93 °C)
  • Minimum application temperature of 30 °F for cold environments

Specifications

BrandThe Supplies Shops.com

Questions about this item

How do I load the 1" core rolls into my thermal transfer printer and what step do people miss?

Slide each roll onto the printer's 1" spindle, thread the polyester liner under the printhead and over the platen roller, then close the latch; the step often missed is calibrating the gap sensor so the 7/8" perforation is detected for each label.

What maintenance or replacement will these labels need over time?

The printhead will eventually wear from the ribbon friction, so plan periodic cleaning with isopropyl alcohol and replacement when print quality degrades; the labels themselves are single-use and the 12000-count carton is consumed as printed.

What temperature limit appears first during sustained high-volume printing?

The adhesive's upper service limit of 200degF (93degC) is reached before the polyester facestock degrades, so keep the printhead temperature setting and ambient heat below that threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.