We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carton containing two fan-folded stacks of perforated white labels

Abbott Label

Abbott Label 4x8 Fan Fold Labels Perforated 2500 Carton

SKU CH-QXQ7-3BE26

Fan-fold thermal-transfer labels, 2500 per carton, perforated for easy separation and FDA-compliant adhesive

  • 2500 labels per carton keep high-volume printing running
  • Perforated every 4-1/8" for clean label separation
  • FDA CFR 175.105 compliant adhesive suits indirect food contact
  • Service range -65 °F to 200 °F handles freezer to heat
  • 40# basis weight stock feeds reliably through thermal transfer printers

General-Use Fan-Fold Labels

These 4" x 8" fan-fold labels arrive as two stacks of 1250 labels each, giving 2500 labels per carton. They are designed for general-purpose thermal transfer printing and carry a permanent emulsion acrylic adhesive that meets FDA CFR 175.105 for indirect food contact.

Perforated Roll Replacement

The continuous fan-fold format with a horizontal perforation every 4-1/8" replaces individual die-cut rolls when high-volume, uninterrupted printing is needed. The jump is worth it when a workflow demands 2500 labels without roll changes and the adhesive must perform from -65°F to 200°F service temperatures.

Printer Loading and Adhesion

Loading is straightforward: feed the fan-fold stack through the printer’s tractor or pinch-roller mechanism and align the perforations to the sensor. The main issue is adhesive build-up on the printhead during long runs, which regular cleaning prevents, and ensuring the minimum application temperature of 30°F is met for reliable initial tack.

Highlights

  • 2500 labels per carton keep high-volume printing running
  • Perforated every 4-1/8" for clean label separation
  • FDA CFR 175.105 compliant adhesive suits indirect food contact
  • Service range -65 °F to 200 °F handles freezer to heat
  • 40# basis weight stock feeds reliably through thermal transfer printers

Specifications

BrandThe Supplies Shops.com

Questions about this item

What size printer core do these 4 x 8 inch fan-fold stacks fit?

The labels are supplied as two fan-fold stacks of 1250 labels each, designed to feed from the rear or bottom tray of standard thermal-transfer printers that accept 3-inch cores.

How do I load the perforated fan-fold media so the perf lines up with the cutter?

Align the first label so the horizontal perforation sits exactly at the tear bar, then close the printhead; the printer will advance each 4-1/8 inch label to the perf for clean separation.

When should I replace the printhead if I run the full 2500-label carton?

The permanent emulsion acrylic adhesive is rated for high-speed converting and service from -65°F to 200°F, so printhead wear depends on your printer’s duty cycle rather than the label stock itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.