We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four white label rolls on a shelf, perforated edges visible

Abbott Label

Abbott Label 4 x 6 in General Use Thermal Transfer Labels Perforated 1000 per roll 4 Rolls per Carton

SKU CH-XSP6-MKRKX

Perforated thermal-transfer labels, 1000 per roll and 4000 per carton, with sensor notches and permanent acrylic adhesive rated from -65 °F to 200 °F

  • 4000 labels per carton for high-volume printing
  • Perforated every 6 inches for easy label separation
  • Sensor notches ensure accurate printer alignment
  • FDA CFR 175.105 compliant adhesive for indirect food contact
  • Service temperature range from -65°F to 200°F

Label Specifications

These 4 x 6 inch thermal transfer labels use a 40# basis weight paper stock. Each roll contains 1000 labels with horizontal perforations every 6 inches. Sensor notches are included for printer alignment. Four rolls are packed per carton for a total of 4000 labels.

Compatibility Check

Suited for general-purpose shipping, inventory and barcode printing where permanent adhesion is required. The acrylic adhesive meets FDA CFR 175.105 for indirect food contact. Not suitable for direct thermal printers that do not use a ribbon. Buyers needing waterproof or tear-resistant synthetic materials should look elsewhere.

Temperature Limits

Minimum application temperature is 30°F with a recommended service range from -65°F to 200°F (-54°C to 93°C). This range supports cold-storage and high-heat environments. Verify that your printer and ribbon formulation match these thermal parameters before purchasing.

Highlights

  • 4000 labels per carton for high-volume printing
  • Perforated every 6 inches for easy label separation
  • Sensor notches ensure accurate printer alignment
  • FDA CFR 175.105 compliant adhesive for indirect food contact
  • Service temperature range from -65°F to 200°F

Specifications

BrandThe Supplies Shops.com

Questions about this item

What core size and outer diameter do the 4 x 6 in rolls need to fit my printer?

Each roll has a 3" core and an 8" outer diameter, so the printer must accept those dimensions.

How do I load the labels so the sensor notches and perforations align correctly?

Feed the roll with the perforated edge forward and the sensor notches facing the printer's detection slot; the horizontal perf every 6" and the notches must pass the sensor together.

When will the adhesive need replacement due to temperature limits?

The permanent emulsion acrylic adhesive is rated for a service range of -65°F to 200°F (-54°C to 93°C) and a minimum application temperature of 30°F; replace the roll if storage or use exceeds these limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.