We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Roll of blue perforated thermal transfer labels 4 inch by 4 inch 1500 per roll

Abbott Label

Abbott Label 4" x 4" Perforated Thermal Transfer Labels Blue (2975) 1500 per roll

SKU CH-ZQ9S-FVJGD

Perforated thermal-transfer labels, blue tinted, 1500 per roll with permanent acrylic adhesive rated from -65 °F to 200 °F

  • 1500 labels per roll keep high-volume printing running longer
  • Perforated every 4-1/8" for clean, easy label separation
  • Permanent acrylic adhesive meets FDA CFR 175.105 for indirect food contact
  • Adhesive performs from -65 °F to 200 °F service range
  • Four rolls per carton deliver 6000 labels total

General-purpose thermal-transfer label roll

These 4-inch by 4-inch blue labels arrive on a 3-inch core with an 8-inch outer diameter. Each roll contains 1500 perforated labels and a carton holds four rolls for 6000 labels total. The permanent emulsion acrylic adhesive meets FDA CFR 175.105 for indirect food contact.

Upgrading from non-perforated or smaller-core rolls

The horizontal perforation every 4-1/8 inches lets you tear single labels cleanly without a dispenser cutter. The 3-inch core fits most industrial thermal-transfer printers that reject 1-inch cores. The jump is worth it when you need food-safe adhesion and high-speed converting on wide-web equipment.

Installation notes and common issues

Load the roll onto the 3-inch spindle, thread through the printer, and calibrate the sensor for the perf gap. Minimum application temperature is 30degF; service range spans -65degF to 200degF (-54degC to 93degC). Misaligned perforation detection causes misfeeds, and applying below 30degF reduces initial tack.

Highlights

  • 1500 labels per roll keep high-volume printing running longer
  • Perforated every 4-1/8" for clean, easy label separation
  • Permanent acrylic adhesive meets FDA CFR 175.105 for indirect food contact
  • Adhesive performs from -65 °F to 200 °F service range
  • Four rolls per carton deliver 6000 labels total

Specifications

BrandThe Supplies Shops.com

Questions about this item

What core size and outer diameter does the 2975 roll need on the printer spindle?

The roll has a 3" core and an 8" outer diameter, so the printer must accept that core size and fit a roll up to 8" in diameter.

How do I load the perforated thermal transfer labels so they feed and cut correctly?

Load the roll with labels facing out, thread the web through the print mechanism past the perforation at every 4-1/8", and set the sensor to the gap so each label stops at the perf for clean separation.

When should I replace the printhead when printing these blue thermal transfer labels?

Replace the printhead when print quality fades or bars appear; the permanent emulsion acrylic adhesive runs at service temperatures from -65degF to 200degF and meets FDA CFR 175.105, so adhesive buildup is minimal, but normal thermal-transfer wear still dictates the replacement interval.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.