We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two cartons of white fan-fold label stacks, perforated edges visible

Abbott Label

Abbott Label 4" x 3" Fan Fold Labels Perforated 4000 per Stack 2 Stacks per Carton

SKU CH-F6VZ-MQT04

Perforated fan-fold thermal transfer labels supply 8000 labels per carton with permanent acrylic adhesive rated for indirect food contact and a service range of -65degF to 200degF

  • Ready for high-volume printing with 8000 labels per carton
  • Perforated design allows easy separation of each label
  • Adhesive meets FDA CFR 175.105 for indirect food contact
  • Performs reliably from -65 °F to 200 °F service range
  • Permanent acrylic adhesive provides strong tack at low temperatures

General Use Fan Fold Labels

These Abbott Label fan fold labels arrive as 4000 perforated labels per stack with two stacks per carton for a total of 8000 labels. They use a permanent emulsion acrylic adhesive suited for general purpose labelling tasks. The adhesive meets FDA CFR 175.105 requirements for indirect food contact. The label stock has a 40# basis weight.

Upgrade from roll-fed or non-perforated stock

The fan fold format with horizontal perforations every 4-1/8 inches allows continuous printing and easy tear-off without a roll holder. The jump is worth it when you need high-volume thermal transfer output and want to avoid roll changeovers. Buyers who need pre-cut individual sheets or a different label size will not be served by this continuous perforated format.

Thermal transfer printing and temperature limits

These labels are designed for thermal transfer printers and are not compatible with direct thermal hardware. The adhesive has a minimum application temperature of 30degF and a recommended service range of -65degF to 200degF (-54degC to 93degC). Operation outside this range or use with incompatible print methods may cause adhesion failure.

Highlights

  • Ready for high-volume printing with 8000 labels per carton
  • Perforated design allows easy separation of each label
  • Adhesive meets FDA CFR 175.105 for indirect food contact
  • Performs reliably from -65 °F to 200 °F service range
  • Permanent acrylic adhesive provides strong tack at low temperatures

Specifications

BrandThe Supplies Shops.com

Questions about this item

What printer width and label dimensions do these 4" x 3" fan-fold labels require?

The labels are 4 inches wide by 3 inches deep with a horizontal perforation every 4-1/8 inches, so the printer must accept 4-inch wide fan-fold media.

How do you load the two stacks of 4000 perforated labels into a thermal transfer printer, and what step is often missed?

Feed the continuous fan-fold stack through the printer's rear or bottom tractor feed, align the 4-1/8" perforations with the sensor, and remember to set the gap/perforation sensor mode — not continuous — so each label stops correctly.

When should the permanent emulsion acrylic adhesive be replaced or re-evaluated based on its temperature limits?

The adhesive is rated for application at 30°F minimum and service from -65°F to 200°F (-54°C to 93°C); if your environment exceeds this range, plan to test or replace the label stock.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.