Abbott Label 4" x 2" Thermal Transfer Labels Perforated 730 per roll 4 rolls carton

General-Use Thermal Transfer Labels

These Abbott Label rolls supply 730 perforated labels each for thermal transfer printing. Four rolls ship in a single carton giving 2920 labels total. The permanent emulsion acrylic adhesive is rated for indirect food contact under FDA CFR 175.105 and works down to a minimum application temperature of 30degF with a service range of -65degF to 200degF. The 40# basis-weight paper suits everyday labelling tasks.

Perforated Roll Constraints

Each roll carries 730 labels on a 1-inch core with a 4-inch outer diameter. Horizontal perforations appear every 2-1/8 inches so labels separate cleanly by hand or dispenser. The adhesive maintains tack at low temperatures but is not designed for extreme heat beyond 200degF or for direct food contact. Roll dimensions and core size must match your printer’s spindle and maximum roll diameter.

Printer and Environment Check

Verify that your thermal transfer printer accepts a 1-inch core and can accommodate a 4-inch roll diameter. Confirm the label width and perforation spacing match the media guides and cutter position. Ensure the operating environment stays within the -65degF to 200degF service range and that the application surface temperature is at least 30degF when labels are applied.