We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White perforated thermal transfer label rolls in a carton

Abbott Label

Abbott Label 4" x 2" Perforated Thermal Transfer Labels 3000 per roll 4 Rolls per Carton

SKU CH-55AT-GEBGN

Perforated thermal-transfer labels supply 3000 per roll and 12000 per carton with permanent acrylic adhesive rated from -65degF to 200degF and FDA CFR 175.105 compliance

  • 12 000 labels per carton from four rolls of 3 000 each
  • Perforated every 2-1/8" for clean label separation
  • FDA CFR 175.105 compliant adhesive for indirect food contact
  • Service range from -65 °F to 200 °F for cold or hot environments
  • 40# basis weight paper suited to high-speed thermal transfer printing

General-use thermal transfer labels

These labels suit warehouses, shipping desks and light manufacturing lines that need a reliable, permanent adhesive on a standard paper face stock. They arrive new in cartons of four rolls, each roll holding three thousand perforated labels ready for thermal transfer printers. The acrylic emulsion adhesive meets FDA CFR 175.105 for indirect food contact.

Capacity and headroom

A single carton delivers twelve thousand labels, giving high-volume operations enough stock for extended runs without frequent change-overs. The three-inch core and eight-inch outer diameter fit most industrial desktop and mid-range tabletop printers. Perforations every two and one-eighth inches allow clean tear-off but the roll length limits use on printers with smaller maximum roll diameters.

Adhesive temperature range

The permanent acrylic adhesive applies down to thirty degrees Fahrenheit and remains serviceable from minus sixty-five to two hundred degrees Fahrenheit (minus fifty-four to ninety-three degrees Celsius). This wide window makes the labels suitable for cold-storage labelling and warm indoor environments alike. Buyers needing a removable adhesive or a synthetic face stock should look elsewhere.

Highlights

  • 12 000 labels per carton from four rolls of 3 000 each
  • Perforated every 2-1/8" for clean label separation
  • FDA CFR 175.105 compliant adhesive for indirect food contact
  • Service range from -65 °F to 200 °F for cold or hot environments
  • 40# basis weight paper suited to high-speed thermal transfer printing

Specifications

BrandThe Supplies Shops.com

Questions about this item

Will these labels feed correctly on a printer that takes 3-inch cores and 8-inch outer diameter rolls?

Yes, each roll has a 3-inch core and an 8-inch outer diameter, matching printers designed for those dimensions.

How can I verify the adhesive is activating properly after I load the first roll?

Check that labels peel cleanly at the 2-1/8-inch perforation, show no edge lifting at room temperature, and adhere firmly to a test surface chilled to 30°F.

Does the carton include a ribbon or printhead cleaning card, or do I order those separately?

The carton contains only the four label rolls (12000 labels total); thermal-transfer ribbon and cleaning supplies are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.