We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White direct thermal label rolls in a carton, perforated, smooth bright white paper finish

Abbott Label

Abbott Label 4" x 2" Direct Thermal Labels 1250/roll 4 rolls carton

SKU CH-X0P4-3CAWB

Direct thermal labels sized 4" x 2", 1250 per roll and 5000 per carton, using Fasson 300LD facestock with permanent acrylic adhesive meeting FDA 175.105 for indirect food contact

  • Ready to print with direct thermal tech
  • 1250 labels per roll for high volume
  • 5000 labels per carton reduces reorders
  • Perforated edges simplify label separation
  • FDA 175.105 adhesive safe for food contact

Ideal for industrial direct-thermal printing

These white direct-thermal labels measure four inches by two inches and come in cartons of four rolls. Each roll holds 1250 labels for a total of 5000 labels per carton. They suit high-volume shipping, warehousing and logistics operations that rely on industrial direct-thermal printers. Buyers needing colour output or ink-based printing should look elsewhere.

Sensitive coating requires dry conditions

The Fasson Direct-Therm 300LD facestock carries a high-sensitivity thermal layer that darkens without ribbons or toner. Exposure to water, oil, alcohol or other liquids can damage the coating and ruin print quality. Store and use the labels in dry environments to maintain reliable imaging. No power or cooling specifications apply to this media.

Permanent acrylic adhesive meets FDA 175.105

A general-purpose emulsion acrylic adhesive provides strong bonding to corrugated cardboard and superior adhesion to plastic surfaces. The adhesive complies with FDA CFR 175.105 for indirect food contact, supporting labelling on food-packaging cartons. Perforations between labels simplify separation during application. No software or drivers are included.

Highlights

  • Ready to print with direct thermal tech
  • 1250 labels per roll for high volume
  • 5000 labels per carton reduces reorders
  • Perforated edges simplify label separation
  • FDA 175.105 adhesive safe for food contact

Specifications

BrandThe Supplies Shops.com

Questions about this item

How do I load the 4" x 2" roll into my industrial direct thermal printer without misaligning the perforations?

Place the roll so labels feed from the bottom, thread the leading edge under the guide pins and past the platen roller, then close the printhead latch; the perforations will line up automatically when the sensor detects the gap.

When will the adhesive on these Fasson Direct-Therm 300LD labels need replacement due to ageing?

The permanent emulsion acrylic adhesive is designed for the life of the label on corrugated cardboard or plastic; no scheduled replacement is required unless the roll is stored beyond the manufacturer's recommended shelf life.

What is the first limit reached during continuous high-volume printing with the 1250-label rolls?

The 1250 labels per roll run out first, requiring a roll change before the printer's thermal printhead or mechanism reaches any duty-cycle limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.