We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white rectangular label stacks, fan-folded, perforated edges visible

Abbott Label

Abbott Label 3x5 Fan Fold Labels Perforated 1250 per Stack 2 Stacks

SKU CH-X5W2-K8WP3

Fan-fold thermal transfer labels, perforated every 3-1/8 inches, 1250 labels per stack with two stacks per carton for 2500 total

  • 2500 labels per carton for high-volume printing
  • Perforated every 3-1/8" for easy label separation
  • Permanent acrylic adhesive meets FDA CFR 175.105 for indirect food contact
  • Service range from -65°F to 200°F for cold and hot environments
  • 40# basis weight stock feeds reliably in thermal transfer printers

2500 General-Use Fan-Fold Labels

This carton contains two fan-folded stacks of 1250 perforated thermal-transfer labels each, totalling 2500 labels. The permanent emulsion acrylic adhesive is FDA CFR 175.105 compliant for indirect food contact and is designed for high-speed converting. The product is supplied new in a single carton.

Perforated 3" x 5" Format for Batch Printing

Each label measures 3 inches by 5 inches with a horizontal perforation every 3-1/8 inches for easy separation. The 40# basis-weight paper handles general-purpose labelling tasks in office, warehouse or light-industrial settings. The adhesive provides a minimum application temperature of 30degF and a service range of -65degF to 200degF.

Replaces Cut-Sheet or Roll Media in High-Volume

The fan-fold configuration feeds continuously through compatible thermal-transfer printers, reducing reload frequency compared with smaller rolls or cut sheets. It is not suited for direct-thermal printers, colour printing or applications requiring synthetic or waterproof face stocks. Buyers needing fewer than 2500 labels or a different adhesive spec should consider alternative formats.

Highlights

  • 2500 labels per carton for high-volume printing
  • Perforated every 3-1/8" for easy label separation
  • Permanent acrylic adhesive meets FDA CFR 175.105 for indirect food contact
  • Service range from -65°F to 200°F for cold and hot environments
  • 40# basis weight stock feeds reliably in thermal transfer printers

Specifications

BrandThe Supplies Shops.com

Questions about this item

Will these 3x5 fan-fold labels feed correctly through my older thermal-transfer printer?

The 3-1/8 inch perforation pitch and 40# basis weight match standard thermal-transfer feed paths, so most legacy desktop and industrial printers handle the stack without skewing.

How can I verify the adhesive is performing within the rated temperature range after I load the first roll?

Apply a test label at room temperature, then expose it to freezer conditions down to -65degF and heat up to 200degF; the permanent emulsion acrylic should maintain tack without lifting.

Does the carton contain only the two 1250-label stacks, or are cores, ribbons or software included?

The box ships with exactly two fan-fold stacks totalling 2500 labels; no cores, ribbons, dispensers or software are bundled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.