We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carton of eight white thermal-transfer label rolls

Abbott Label

Abbott Label 2" x 1" Non-Perf Thermal Transfer Labels 5500 per roll 8 rolls carton

SKU CH-V5JD-HTFT2

General-use thermal-transfer labels, 5500 per roll across eight rolls for 44000 total, with permanent acrylic adhesive rated from -65°F to 200°F and FDA 175.105 compliant

  • 44000 labels per carton for high-volume printing
  • Non-perforated rolls suit continuous thermal transfer workflows
  • Adhesive rated for indirect food contact per FDA CFR 175.105
  • Service range from -65°F to 200°F for cold and hot environments
  • Minimum application temperature of 30°F enables cold-chain labelling

General-Use Thermal Transfer Labels

These 2" x 1" non-perforated labels suit shipping, inventory and general identification tasks. Each roll holds 5500 labels and a carton contains 8 rolls for 44000 total. The permanent emulsion acrylic adhesive meets FDA CFR 175.105 for indirect food contact and uses a 40# basis weight.

Adhesive Temperature Range

The adhesive applies at a minimum of 30°F and remains functional from -65°F to 200°F (-54°C to 93°C). It delivers strong initial tack and ultimate adhesion at lower temperatures without compromising high-speed converting performance.

Non-Perforated Continuous Format

Labels are supplied without perforations so they feed as a continuous web through thermal transfer printers. Buyers who need individual die-cut separation or pre-scored tear lines should choose a perforated product instead.

Highlights

  • 44000 labels per carton for high-volume printing
  • Non-perforated rolls suit continuous thermal transfer workflows
  • Adhesive rated for indirect food contact per FDA CFR 175.105
  • Service range from -65°F to 200°F for cold and hot environments
  • Minimum application temperature of 30°F enables cold-chain labelling

Specifications

BrandThe Supplies Shops.com

Questions about this item

How do I load the 3" core rolls into my thermal transfer printer, and what step causes misalignment?

Place each 8" outer-diameter roll on the 3" core spindle so the label face feeds from the bottom; the common error is threading the web over the platen roller instead of under it, which reverses the print side.

What consumable will need replacing after the 44000 labels in this carton are used?

The thermal-transfer ribbon — this stock has no direct-thermal coating, so a resin or wax-resin ribbon matching the label width must be swapped once the roll ends.

At what temperature does the permanent acrylic adhesive stop performing during continuous high-speed printing?

The adhesive’s recommended service range tops out at 200°F (93°C); sustained print-head heat above that level causes tack loss and label lift before the 5500-label roll finishes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.