We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four white direct thermal label rolls in a carton

Abbott Label

Abbott Label 2-1/4" x 1-1/4" White Direct Thermal Labels 1135 per roll 4 Rolls per Carton

SKU CH-GS8R-DHG4H

White direct thermal labels with 1135 labels per roll and 4540 per carton, using Fasson 300LD facestock and FDA CFR 175.105 compliant adhesive for industrial printers

  • Direct thermal printing needs no ink or ribbon
  • 1135 labels on each roll reduce changeovers
  • 4540 labels per carton support high-volume runs
  • Perforated design allows clean label separation
  • FDA 175.105 compliant adhesive suits indirect food contact

Direct Thermal Labels for Industrial Printers

These white direct thermal labels measure 2-1/4" x 1-1/4" and are built for high-volume industrial label printers. Each roll contains 1135 labels and a carton holds 4 rolls for a total of 4540 labels. They use a Fasson Direct-Therm 300LD facestock with a high-sensitivity coating designed for dry environments.

Perforated Rolls Load Quickly

The perforated design separates individual labels cleanly during printing so rolls feed smoothly in compatible direct thermal machines. No ribbon or ink cartridge is required because the thermal layer reacts directly to heat. Exposure to water, oil, alcohol or other liquids can damage the coating and cause print fading or unreadable labels.

Adhesive Limits and Compliance

The permanent emulsion acrylic adhesive bonds strongly to corrugated cardboard and adheres well to plastic surfaces. It meets FDA CFR 175.105 for indirect food contact but is not rated for direct food application or prolonged immersion. Labels are intended for dry indoor use; moisture or solvent contact will degrade the thermal layer.

Highlights

  • Direct thermal printing needs no ink or ribbon
  • 1135 labels on each roll reduce changeovers
  • 4540 labels per carton support high-volume runs
  • Perforated design allows clean label separation
  • FDA 175.105 compliant adhesive suits indirect food contact

Specifications

BrandThe Supplies Shops.com

Questions about this item

How can I confirm the labels are printing correctly after loading a roll?

Run a test print and verify the 300 DPI thermal coating produces sharp, legible images without streaks or fading on the white Fasson Direct-Therm 300LD facestock.

What comes in the carton and what must I supply separately?

The carton contains 4 perforated rolls with 1135 labels each, totalling 4540 labels; you must provide a compatible direct thermal printer.

Which label size and adhesive type should I choose for shipping cartons and indirect food contact?

The 2-1/4" x 1-1/4" white direct thermal labels with permanent emulsion acrylic adhesive meet FDA CFR 175.105 for indirect food contact and adhere well to corrugated cardboard and plastics.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.