We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium alloy case with dual fans for Raspberry Pi 4, open design, 100*72*35mm

AAAwave

AAAwave ODS675 Aluminium Alloy Case Accessory with Dual Fan for Raspberry Pi 4 Model B

SKU CH-SA36-JJ0CE

Aluminium alloy case with dual fans and 0.5 mm silicon pads cools a Raspberry Pi 4 Model B while keeping all ports accessible

  • Aluminium alloy shell protects the Raspberry Pi 4 Model B
  • Dual low-power fans deliver active cooling without high energy draw
  • Three 0.5 mm silicon pads transfer heat directly to the case body
  • Open layout preserves wireless signal reception
  • All ports and slots align precisely for hassle-free connectivity

Aluminium Case for Raspberry Pi 4 Model B

The AAAwave ODS675 is an aluminium alloy enclosure built specifically for the Raspberry Pi 4 Model B single-board computer. It provides a rigid metal shell that protects the board while integrating two cooling fans for active thermal management. Makers, hobbyists and embedded developers can install the board without modification.

Open Design with Dual Fans and Thermal Pads

The open-case layout leaves wireless signals unobstructed so Wi-Fi and Bluetooth performance are not shielded by metal. Two low-power fans draw air through the chassis while three 0.5mm silicone pads conduct heat from the processor to the aluminium body. Builders may substitute thermal paste for the pads if they prefer.

100 by 72 by 35 Millimetre Form Factor

The accessory measures 100mm long, 72mm wide and 35mm tall, matching the Raspberry Pi 4 Model B footprint exactly. Every port and slot aligns with the case cutouts for a precise fit. Buyers needing a smaller profile or a fully sealed enclosure should look elsewhere.

Highlights

  • Aluminium alloy shell protects the Raspberry Pi 4 Model B
  • Dual low-power fans deliver active cooling without high energy draw
  • Three 0.5 mm silicon pads transfer heat directly to the case body
  • Open layout preserves wireless signal reception
  • All ports and slots align precisely for hassle-free connectivity

Specifications

No published specifications for this item yet.

Questions about this item

How does the open aluminium-alloy design affect the Raspberry Pi 4 Model B's wireless signal?

The open case design avoids blocking the on-board Wi-Fi and Bluetooth antennas, so signal strength is not reduced by the metal shell.

What physical dimensions must my workspace accommodate for this 100*72*35MM case?

Allow at least 100 mm length, 72 mm width and 35 mm height; the dual fans sit flush on top, so no extra vertical clearance is needed beyond the 35 mm.

Which step do builders often miss when fitting the three 0.5 mm silicon cooling pads?

Many forget to peel the protective film off each pad before pressing it onto the CPU, RAM and wireless chips, leaving an air gap that ruins thermal contact.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.