A-Tech
A-Tech Supermicro Certified 8GB DDR3L 1600MHz CL11 1.35V 240-Pin Desktop RAM
An 8 GB DDR3L desktop DIMM running at 1600 MHz with CL11 latency and 1.35 V low voltage, certified for Supermicro systems
- Capacity8GB
- SpeedDDR3L 1600(PC3L 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- Supermicro certified for guaranteed system compatibility
- 8 GB DDR3L capacity boosts multitasking headroom
- 1600 MHz CL11 timing delivers responsive data access
- 35 V low-voltage operation reduces power draw
- 240-pin DIMM fits standard desktop memory slots
Certified Supermicro Desktop Memory
This 8GB DDR3L module carries the Supermicro MEM-DR380L-HL04-UN16 certification and runs at 1600MHz with CL11 latency. It uses Hynix chips on a 240-pin unbuffered DIMM operating at 1.35V. The stick is validated for compatible Supermicro systems.
Suitable for Supermicro DDR3L platforms
Buyers upgrading or repairing a Supermicro desktop or workstation that specifies DDR3L 1600 non-ECC memory should select this part. Systems requiring ECC, registered modules, standard 1.35V DDR3, or a different DDR generation will not accept this DIMM.
Deciding specification: DDR3L 1.35V
The single figure that determines fit is the 1.35V low-voltage DDR3L rating. Only motherboards explicitly listing DDR3L 1600 (PC3L-12800) non-ECC support will operate correctly with this module.
Highlights
- Supermicro certified for guaranteed system compatibility
- 8 GB DDR3L capacity boosts multitasking headroom
- 1600 MHz CL11 timing delivers responsive data access
- 35 V low-voltage operation reduces power draw
- 240-pin DIMM fits standard desktop memory slots
Specifications
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR380L-HL04-UN16 |
| Capacity | 8GB |
| Speed | DDR3L 1600(PC3L 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR380L-HL04-UN16 (HMT41GU6DFR8A-PB) |
| Recommend Use | Compatible Supermicro Systems |
Questions about this item
How does the 1600 MHz speed affect everyday performance once the module is installed?
The module runs at 1600 MHz, so the memory controller can move data at the PC3-12800 rate. That bandwidth helps applications load faster and keeps multitasking smooth when the CPU needs quick access to RAM.
What does the DDR3L 1.35 V rating mean for compatibility with standard DDR3 slots?
DDR3L modules operate at 1.35 V but are backward-compatible with 1.5 V DDR3 slots. The memory controller will supply the higher voltage if needed, so the stick works in both low-voltage and regular desktop boards.
Will the 240-pin DIMM fit in my Supermicro desktop chassis without a heat spreader?
Yes. The stick uses the standard 240-pin DIMM form factor and has no heat spreader, so it clears typical CPU coolers and fits any desktop motherboard slot wired for unbuffered non-ECC DDR3L memory.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



