A-Tech
A-Tech 4GB DDR4 2133MHz CL15 260-Pin SODIMM for IBM-Lenovo 4X70J67434 Laptop RAM
4GB DDR4 2133MHz CL15 SODIMM laptop memory upgrade with 260-pin unbuffered design at 1.2V for compatible Lenovo systems
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCNo
- 4GB capacity expands multitasking headroom for everyday workloads
- DDR4 2133MHz speed accelerates application loading and data access
- CL15 latency and 1.2V operation balance responsiveness with efficiency
- 260-pin SODIMM form factor fits compatible laptop memory slots
- Tested with major-brand chips for dependable system stability
4GB DDR4 2133MHz SODIMM upgrade
This 4GB DDR4 module runs at 2133MHz with CL15 timing and 1.20V operation. It uses a 260-pin SO-DIMM form factor built with major brand chips. The unbuffered, non-ECC design targets AMD and Intel laptop platforms needing a single-slot capacity increase.
Replaces IBM-Lenovo 4X70J67434
The module matches the specifications for IBM-Lenovo 4X70J67434, SM30E51243, 5M30K59778 and 5M30H35724. Swapping an existing 2GB or 4GB DDR4 stick for this unit adds headroom for multitasking when the system has a free slot or when replacing a lower-capacity module.
Verify DDR4 SO-DIMM support and slot availability
Confirm the laptop accepts DDR4 SO-DIMM memory at 2133MHz and uses 260-pin unbuffered modules. Check the maximum supported capacity per slot and total system limit in the manufacturer documentation. Ensure an empty slot exists or plan to remove the current module before ordering.
Highlights
- 4GB capacity expands multitasking headroom for everyday workloads
- DDR4 2133MHz speed accelerates application loading and data access
- CL15 latency and 1.2V operation balance responsiveness with efficiency
- 260-pin SODIMM form factor fits compatible laptop memory slots
- Tested with major-brand chips for dependable system stability
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
Does the 260-pin DDR4 SODIMM fit a standard laptop memory slot?
Yes, the module uses the 260-pin DDR4 SO-DIMM form factor that matches the standard laptop memory slot.
What is the correct orientation when inserting the module, and which step do people often miss?
Align the notch on the module with the key in the slot, press firmly until the side clips click into place, and verify the module sits flat.
Will the 1.20 V DDR4 module need any firmware update or replacement after a few years?
No firmware update is required; the module runs at standard 1.20 V DDR4 voltage and is rated for the life of the laptop.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



