A-Tech 16GB (4x4GB) DDR4 2666MHz CL19 1.2V 288-Pin Desktop RAM Kit
- 16GB (4 x 4GB)
- 288-Pin PC RAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
A 16 GB DDR4 SODIMM module running at 3200 MHz with CL22 latency and 1.2 V operation for laptop memory upgrades
Speed DDR4 3200 (PC4 25600)
This 16 GB DDR4 SO-DIMM module runs at 3200 MHz with CL22 latency and 1.20 V standard voltage. It uses the 260-pin form factor required by laptops, notebooks and all-in-one PCs that support DDR4 3200 memory. The non-ECC unbuffered design matches mainstream consumer platforms from major brands including Acer, ASUS, Dell, HP, Lenovo and others.
The module replaces a single lower-capacity stick or fills an empty slot to reach 16 GB of total memory. The jump is worthwhile when your system currently runs 8 GB or less and struggles with multitasking, browser tabs or large documents. Buyers who need more than 16 GB total or require ECC error correction should look elsewhere.
Installation requires a free SO-DIMM slot and a motherboard that accepts DDR4 3200 unbuffered memory at 1.2 V. The stick frees up the second slot for a future matching module if the platform supports dual-channel operation. Verify your device's maximum supported speed and total capacity before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Laptop Memory RAM |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The module uses the standard 260-pin SO-DIMM form factor for DDR4 laptop memory. It requires an available DDR4 SO-DIMM slot that supports 1.2V operation.
Align the notch on the module with the key in the slot, insert at a slight angle, then press down firmly until both side clips click audibly to secure the 260-pin connector.
No firmware updates are required for this memory. It is a solid-state component with no moving parts, designed to last the usable life of the laptop under normal operating conditions.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?