A-Tech
A-Tech 16GB DDR4 2400MHz CL17 260-Pin SODIMM for Micron MTA16ATF2G64HZ-2G3H1 Laptop RAM
A 16 GB DDR4 2400 MHz SODIMM with CL17 latency and 1.2 V operation for laptop upgrades
- Capacity16GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 16 GB capacity for smoother multitasking
- DDR4 2400 MHz speed for faster data rates
- CL17 latency for responsive performance
- 2 V operation for lower power draw
- 260-pin SODIMM fits laptop memory slots
16GB DDR4 2400MHz SODIMM
This 16GB DDR4 2400MHz CL17 SODIMM is a compatible replacement for the Micron MTA16ATF2G64HZ-2G3H1 module. It targets laptop, notebook and all-in-one owners who need a straightforward memory upgrade to improve multitasking and system responsiveness. The module runs at standard 1.20V voltage and uses a 260-pin unbuffered non-ECC design.
Upgrade from lower capacity or slower DDR4
The jump is worth it when your current system has less than 16GB of memory or runs at a lower DDR4 speed, creating bottlenecks during heavy workloads. Replacing a smaller or slower module with this 16GB PC4-19200 stick adds headroom for demanding applications without changing the platform. Buyers who need ECC error correction or registered buffering cannot use this module.
Simple slot insertion with compatibility check
Installation requires opening the laptop chassis, aligning the 260-pin key with the SO-DIMM slot and pressing firmly until the retention clips engage. The most common issue is a mismatch between the system's supported memory specifications and this module's 2400MHz CL17 timing, so verifying the manufacturer's qualified vendor list before purchase prevents boot failures.
Highlights
- 16 GB capacity for smoother multitasking
- DDR4 2400 MHz speed for faster data rates
- CL17 latency for responsive performance
- 2 V operation for lower power draw
- 260-pin SODIMM fits laptop memory slots
Specifications
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA16ATF2G64HZ-2G3H1 |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MTA16ATF2G64HZ-2G3H1 |
| Recommend Use | Compatible Replacement for Micron MTA16ATF2G64HZ-2G3H1 |
Questions about this item
Does the 260-pin DDR4 SODIMM fit a laptop slot keyed for 262 pins?
The module has 260 pins and matches the standard DDR4 SO-DIMM keying used in laptops, notebooks and all-in-one systems.
What is the correct way to seat the module so the side clips engage?
Insert the module at the angle the slot requires, then press down evenly until both retention clips snap into the notches on the PCB.
Will the 1.2 V DDR4 2400 CL17 module need any firmware update or voltage adjustment later?
No firmware or voltage changes are required; the module runs at standard 1.2 V DDR4 settings for its service life.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



