A&K
A&K AstroBeam S230 Genuine Compatible projector lamp 270W 2000 Hrs
A genuine compatible 270 W replacement lamp module with housing, rated for 2,000 hours, designed for the AstroBeam S230 projector
- TypeProject Lamp
- Wattage270W
- Lamp Life2,000 Hrs.
- Bright images with 270W SHP bulb
- Up to 2000 hours of projection time
- Ready-to-install module with bulb and housing
- Built to ISO 9001 quality standards
- Genuine compatible replacement for AstroBeam S230
Genuine Compatible Replacement Lamp
The A&K AstroBeam S230 is a new 270W projector lamp module supplied with a fully assembled bulb and housing. It is designed for direct installation in the A&K AstroBeam S230 projector, removing the need for separate lamp assembly. The unit uses an SHP lamp type and is manufactured to ISO9001 quality standards.
Suits owners of the AstroBeam S230 needing
This lamp fits buyers who want a direct replacement that includes the housing for immediate changeover. It is not for users whose projector requires a different wattage or lamp form factor. Shoppers looking for a bare bulb without housing should consider other options.
270W SHP lamp rated for 2000 hours
The lamp operates at 270W and carries a rated life of 2000 hours. This single specification determines whether the module matches the projector's original power and longevity requirements. Compatibility is limited to the AstroBeam S230 model.
Highlights
- Bright images with 270W SHP bulb
- Up to 2000 hours of projection time
- Ready-to-install module with bulb and housing
- Built to ISO 9001 quality standards
- Genuine compatible replacement for AstroBeam S230
Specifications
| Brand | A&K |
|---|---|
| Type | Project Lamp |
| Wattage | 270W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What housing dimensions does the AstroBeam S230 module require inside the projector?
The lamp ships as a fully assembled bulb-and-housing module designed to match the original AstroBeam S230 footprint, so it fits the existing projector cage without modification.
Which step do installers most often skip when fitting the SP-LAMP-LP5F unit?
After sliding the module into the compartment, the retaining screws must be tightened and the lamp-hour counter reset in the projector menu; skipping the reset leaves the old timer running.
When should the 270 W SHP bulb be replaced based on the rated 2000-hour life?
Plan replacement around 2,000 hours of use; the projector’s lamp-hour counter will alert you, and brightness will noticeably drop as the bulb nears end of life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



