We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue digital LED soldering iron in black case with accessories

80W Soldering Kit 18-in-1

SKU CH-CY78-XF9QA

An 80W digital LED soldering kit with 10-second heat-up, 180–520°C range and 18 tools in a portable case

  • Watts80 watts
  • Compatibility/FitmentBeizkna
  • Precise temperature control from 180°C to 520°C with ±5°C accuracy
  • 10-second heat-up via 80W ceramic core for fast repairs
  • 18-in-1 kit includes iron, flux, solder wire, tips, pump, stand, tweezers
  • Four ventilation holes and heat-resistant handle reduce heat transfer during extended use
  • Portable PU case organises all accessories for electronics, PCB, jewellery and DIY tasks

80W 18-in-1 Soldering Kit

This 80W digital soldering kit suits electronics repair, PCB work, hobby projects and educational use. It includes the iron, 50g solder wire, flux, five replaceable tips, a desoldering pump, stand, tweezers and a portable PU case. The kit targets beginners and experienced users who need a complete, organised set for bench or field tasks.

Check power source and tip selection

Verify that a standard mains outlet is available for the 80W iron before ordering. Confirm the five included tip shapes cover the joint sizes you typically encounter; specialised tips are not supplied. Ensure your workspace has a stable, heat-resistant surface for the included stand.

Fast heat-up with active cooling

The ceramic core reaches working temperature in about 10 seconds from cold. Four ventilation holes and a steel-tube barrel improve airflow, limiting heat build-up during continuous use. The insulated silicone handle and heat-resistant sheath nut reduce heat transfer to the hand. Power draw is 80 watts at full output.

Highlights

  • Precise temperature control from 180°C to 520°C with ±5°C accuracy
  • 10-second heat-up via 80W ceramic core for fast repairs
  • 18-in-1 kit includes iron, flux, solder wire, tips, pump, stand, tweezers
  • Four ventilation holes and heat-resistant handle reduce heat transfer during extended use
  • Portable PU case organises all accessories for electronics, PCB, jewellery and DIY tasks

Specifications

Watts80 watts
Compatibility/FitmentBeizkna

Questions about this item

What comes in the 18-in-1 soldering kit and what must I buy separately?

The 18-in-1 kit includes the 80W soldering iron with digital LED display, 5 replaceable tips, desoldering pump, stand, tweezers, 50g solder wire and flux in a PU tool case. No separate purchases are required for basic electronics repair.

Which temperature range should I select on the 180°C to 520°C display for typical circuit board work?

Set the iron between 180°C and 520°C using the ± buttons; the ±5°C accuracy and °C/°F switch let you dial in the exact heat needed for each joint.

What does the 10-second heat-up time mean when I start a soldering session?

The 80W ceramic core reaches working temperature in about 10 seconds, so you can begin soldering almost immediately after switching the unit on.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.