We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Magenta 2 metre MPO female-to-female 12-fibre OM4 cable with 3.0 mm LSZH jacket

6COMGIGA

6COMGIGA 6C-MTP-2M 2M MPO Female to Female 12 Fibers OM4 3.0mm LSZH Multimode Fibre Optic Cable

SKU CH-BR6N-Z90J5

A 2-metre OM4 multimode patch cable with 12 fibres and pinless MPO female connectors at each end, rated for 40/100G links up to 150 metres and LSZH jacketed for plenum spaces

  • TypeFiber optical cable
  • ColorMagenta
  • Length2M
  • Connector Number2
  • Terminal GenderFemale to Female
  • Speed40/100G
  • Supports 40G and 100G Ethernet links
  • 12 OM4 fibers in a 3.0 mm LSZH jacket
  • Type B polarity maps channel 1 to channel 12
  • Low typical insertion loss of 0.35 dB
  • Reaches 150 m at 850 nm for 100G

2-Metre OM4 MPO Trunk Cable

This 2-metre multimode trunk cable uses OM4 50/125 µm fibres with MPO female connectors on both ends. The magenta LSZH jacket meets plenum fire-rating requirements and carries twelve fibres in a 3.0 mm diameter. It is built for 40G and 100G Ethernet links in high-density data-centre patches where space and cable management matter.

Suited for QSFP+ SR4 and QSFP28 SR4 Direct Links

Installers running 40G QSFP+ SR4 or 100G QSFP28 SR4 optics over 850 nm will find the 150-metre reach and 0.35 dB typical insertion loss fit the spec. The pinless Type-B polarity (channel 1 to 12) matches standard transceiver wiring. Buyers needing male-pinned MPO connectors, single-mode fibre, or longer single-cable runs beyond the OM4 distance envelope should look at other cable types.

Capacity and Distance Headroom

At 850 nm the cable supports 10G Ethernet to 400 metres and 40/100G Ethernet to 150 metres with maximum insertion loss of 0.75 dB and return loss of 20 dB. Attenuation is 2.3 dB/km at 850 nm and 0.6 dB/km at 1300 nm. The 7.5 mm minimum bend radius and -10 °C to +70 °C operating range give physical headroom for dense patch-panel routing, but the OM4 bandwidth ceiling caps reach well below single-mode distances.

Highlights

  • Supports 40G and 100G Ethernet links
  • 12 OM4 fibers in a 3.0 mm LSZH jacket
  • Type B polarity maps channel 1 to channel 12
  • Low typical insertion loss of 0.35 dB
  • Reaches 150 m at 850 nm for 100G

Specifications

Brand6COMGIGA
Model6C-MTP-2M
TypeFiber optical cable
ColorMagenta
Length2M
Connector Number2
Terminal GenderFemale to Female
Speed40/100G

Questions about this item

What transceivers must I already own to use this 12-fiber MPO Female-to-Female cable?

You need 40G QSFP+ SR4 or 100G QSFP28 SR4 optics with MPO female receptacles; the cable is pinned for direct connection to those modules.

Can I keep my existing OM3 patch panels and still meet 40/100G distances with this OM4 trunk?

Yes — OM4 is backward-compatible with OM3, so the 150 m at 850 nm reach for 40/100G and 400 m for 10G still apply when mixed with OM3 infrastructure.

How do I verify the link is performing to spec after installation?

Measure insertion loss with an 850 nm source and power meter; the link should read ≤ 0.75 dB (typical 0.35 dB) and return loss ≥ 20 dB to confirm factory-grade performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.