We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

63.5Wh Li-Polymer Battery for MacBook Pro 13 A1322 A1278 Mid 2009-2012

SKU CH-5VGY-DJ1CR

A 63.5 Wh lithium-polymer replacement battery for 13-inch MacBook Pro models A1322 and A1278 from mid 2009 through 2012, rated for about 500 recharge cycles

  • ColorBlack
  • TypeCharger
  • CompatibilityA1322 A1278
  • Battery Type96W
  • Featureslithium_polymer, Rechargeable, 63.5 milliamp_hours, 63.5 wat
  • Dimension14.33in W x 12.83in H x 9.06in D
  • 5Wh capacity powers MacBook Pro 13 through a full workday
  • Li-Polymer chemistry with Premium Grade A cells rated for 500 recharge cycles
  • Built-in overcharge, over-discharge, over-current and short-circuit protection keeps the system safe
  • Fits A1278 and A1322 models from Mid 2009 through 2012, not the 2008 version
  • Includes two screwdrivers so you can swap the battery without extra tools

Compatible MacBook Models

This 63.5Wh lithium-polymer battery fits 13-inch MacBook Pro units identified as A1322 or A1278 from the Mid 2009 through 2012 model years. It replaces Apple part numbers 661-5229 and 661-5557 and matches the listed MB990, MB991 and MC724 series identifiers. The pack is not compatible with the A1278 2008 version or the A1321 and A1286 models.

Battery Specifications and Protection

The six-cell pack delivers 10.95V and 63.5Wh capacity using Grade A cells rated for about 500 recharge cycles. Built-in circuitry provides overcharge, over-discharge, over-current and short-circuit protection. The unit weighs 0.84 pounds and measures 14.33in W x 12.83in H x 9.06in D.

Included Tools

Each purchase includes the battery plus two screwdrivers intended for the MacBook Pro 13-inch bottom case and battery screws. No additional cables, adhesives or software are supplied. The packaging uses an anti-static bag with synthetic foam inside a cardboard box.

Highlights

  • 5Wh capacity powers MacBook Pro 13 through a full workday
  • Li-Polymer chemistry with Premium Grade A cells rated for 500 recharge cycles
  • Built-in overcharge, over-discharge, over-current and short-circuit protection keeps the system safe
  • Fits A1278 and A1322 models from Mid 2009 through 2012, not the 2008 version
  • Includes two screwdrivers so you can swap the battery without extra tools

Specifications

BrandDELL
ModelA1322
Part NumberA1322
ColorBlack
TypeCharger
CompatibilityA1322 A1278
Battery Type96W
Featureslithium_polymer, Rechargeable, 63.5 milliamp_hours, 63.5 watt_hours, A1322 A1278, Laptop
Dimension14.33in W x 12.83in H x 9.06in D
Weight0.84 pounds

Questions about this item

How do I install the 63.5Wh Li-Polymer battery in my MacBook Pro 13 A1278 Mid 2010, and which step do people often miss?

Remove the bottom case using the two included screwdrivers, disconnect the old battery connector, fit the new 6-cell pack, reconnect the cable, then reattach the case screws — many forget to reconnect the battery data cable before closing the lid.

What maintenance or replacement will the 63.5Wh Li-Polymer battery need after extended use?

The pack is rated for about 500 recharge cycles; once capacity drops below usable levels you simply swap the entire 6-cell Li-Polymer unit using the same two screwdrivers supplied in the box.

What limit appears first when the 63.5Wh Li-Polymer battery runs under sustained load in a MacBook Pro 13 A1322?

The 10.95V 63.5Wh cell chemistry and built-in protection circuit will trigger over-current or thermal cut-off before the 500-cycle lifespan is reached during continuous heavy discharge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.