60/40 Solder 100g Tin Lead Rosin Core Solder Wire 0.8mm
100 g Sn60-Pb40 rosin-core wire, 0.8 mm diameter, 1.8 % flux, melts at 190 °C
- Standards/Certificationslead, true
- 60/40 tin-lead alloy melts at 190 °C for quick joints
- 8 % rosin flux core flows cleanly and leaves little residue
- 8 mm diameter suits fine circuit-board work and cable repairs
- 100 g spool gives plenty of wire for DIY and household jobs
- Antioxidant formulation keeps the solder bright and reliable over time
60/40 Rosin Core Solder Wire
This 100 g spool uses a Sn60-Pb40 alloy with 1.8 % flux inside the 0.8 mm wire. It melts at 190 °C and is intended for hand soldering of electronic components, cables, circuit boards and small appliances.
Low melting point for sustained work
The alloy reaches a working temperature of 340±20 °C quickly and holds it steadily during long joints. Low melting point and fast wetting keep the tip flowing without repeated reheating, while the rosin core leaves less residue on the board.
Antioxidant wire on a compact spool
Antioxidation treatment keeps the surface clean between sessions so the wire feeds smoothly each time. The 0.22 lb reel fits a bench holder or a toolbox pocket, making it practical for DIY repairs, home improvement jobs and occasional production use.
Highlights
- 60/40 tin-lead alloy melts at 190 °C for quick joints
- 8 % rosin flux core flows cleanly and leaves little residue
- 8 mm diameter suits fine circuit-board work and cable repairs
- 100 g spool gives plenty of wire for DIY and household jobs
- Antioxidant formulation keeps the solder bright and reliable over time
Specifications
| Standards/Certifications | lead, true |
|---|
Questions about this item
How much heat does the 0.8 mm solder wire need for all-day use?
The alloy melts at 190 °C and the recommended iron tip runs at 340 ± 20 °C.
What tools must I already have to use this 100 g spool?
A temperature-controlled soldering iron, tip cleaner, wire cutters and safety ventilation for lead fumes.
Will this Sn60-Pb40 wire work on the older through-hole boards I still repair?
Yes, the 1.8 % rosin flux wets classic copper pads and component leads cleanly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
