We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
6-in-1 soldering kit with iron tip cleaner, solder wire, flux paste, desoldering wick, and stainless steel scraper

50 W soldering kit

SKU CH-QM4N-G9H1T

A 50 W soldering kit with tip cleaner, two 1.0 mm 11 g solder wire rolls, 1.75 oz flux paste, 9.8 ft desoldering wick and a stainless scraper

  • Watts50 watts
  • Clean tip without water using brass-wire cleaner
  • 60/40 rosin-core 1.0 mm wire melts fast, low odour
  • 50 g flux paste wets joints, minimal residue
  • 8 ft no-clean copper wick removes solder quickly
  • Stainless scraper clears dross, keeps area tidy

Complete soldering kit

This 6-in-1 set combines a tip cleaner, two 11 g spools of 1.0 mm 60/40 rosin-core wire, 50 g flux paste, 9.8 ft of no-clean desoldering wick and a stainless steel scraper. It is intended for hobbyists and technicians who need a single package for electrical and electronics repair work. The kit supplies the core consumables for through-hole and surface-mount soldering tasks.

Sustained workflow support

The brass-wire tip cleaner removes oxidation without water, so the iron maintains temperature during long sessions and solder beads do not scatter. Flux paste promotes fast wetting on each joint, while the high-purity copper wick absorbs excess solder quickly when rework is required. Together they keep the process moving without repeated interruptions to clean or re-tin the tip.

Consumable safety and handling

The solder wire contains lead, triggering a California Proposition 65 warning for cancer and reproductive harm. Flux paste produces minimal smoke and no irritating odour during normal use, and the desoldering wick leaves little residue. Users should ventilate the area and wash hands after handling the wire and paste.

Highlights

  • Clean tip without water using brass-wire cleaner
  • 60/40 rosin-core 1.0 mm wire melts fast, low odour
  • 50 g flux paste wets joints, minimal residue
  • 8 ft no-clean copper wick removes solder quickly
  • Stainless scraper clears dross, keeps area tidy

Specifications

Watts50 watts

Questions about this item

How much power does the 50 W soldering iron draw during extended use?

The iron is rated at 50 watts, so it will draw approximately 50 W continuously while the heater is active.

What separate soldering iron must I already own for this 6-in-1 kit to be usable?

The kit includes tip cleaner, 1.0 mm solder wire, flux paste, desoldering wick and a stainless scraper, but no soldering iron itself.

Will the 60/40 rosin-core solder wire and flux paste work reliably on older lead-free boards I still repair?

The 60/40 wire melts at a lower temperature than lead-free alloys, and the flux paste aids wetting, so joints on older boards solder cleanly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.