We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

5 Core

5 Core 6.5 Inch Midrange Car Subwoofer 360W 8 Ohm

SKU CH-7J3T-HXCT9

6.5 inch midrange subwoofer delivers 360 W peak power and 120-10 kHz response from an 8 ohm driver

  • TypeSubwoofers
  • 360W max power delivers clear, balanced sound with enhanced bass and treble
  • 8 ohm impedance integrates easily with PA, DJ systems and amplifiers
  • 120-10kHz frequency response reproduces deep bass through high treble accurately
  • 30 oz Y30 magnet provides strong magnetic field for smooth, loud, detailed sound
  • 5 inch KSV copper voice coil resists heat for reliable performance under intense use

6.5 Inch Midrange Subwoofer

This 5 Core 6.5 inch midrange car subwoofer delivers 360W maximum power with an 8 ohm impedance rating. The 120-10kHz frequency response covers deep bass through high treble for balanced sound reproduction. A 30 oz Y30 magnet and 1.5 inch KSV copper voice coil provide strong magnetic field performance and heat-resistant durability. Standard sizing fits PA and DJ speaker cabinets without modifications.

Replaces Worn Factory Drivers

The subwoofer upgrades aging or blown 6.5 inch speakers in PA systems, DJ cabinets and car audio installations. Its 180W RMS power handling and 94 dB sensitivity produce louder output with less amplifier power than lower-efficiency units. The jump is worth it when existing drivers distort at high volumes or lack the 120-10kHz range needed for full-spectrum playback. Iron basket construction dissipates heat for sustained performance during extended use.

360W Peak With 180W Continuous Headroom

The 360W maximum rating handles dynamic peaks in music and live sound without compression. Continuous 180W RMS capacity supports extended high-volume sessions in DJ and PA applications. The 8 ohm impedance matches most amplifier outputs for efficient power transfer across the 120-10kHz bandwidth. Cloth-edge paper cone construction maintains accuracy until thermal limits of the 1.5 inch voice coil are reached under sustained heavy loads.

Highlights

  • 360W max power delivers clear, balanced sound with enhanced bass and treble
  • 8 ohm impedance integrates easily with PA, DJ systems and amplifiers
  • 120-10kHz frequency response reproduces deep bass through high treble accurately
  • 30 oz Y30 magnet provides strong magnetic field for smooth, loud, detailed sound
  • 5 inch KSV copper voice coil resists heat for reliable performance under intense use

Specifications

TypeSubwoofers

Questions about this item

What mounting depth and cutout diameter does the 6.5 inch speaker require?

The unit needs an 80 mm mounting depth and a standard 6.5 inch cutout for installation.

Which terminals do the speaker wires connect to on the steel cardboard terminal?

Connect positive and negative leads to the marked terminals on the steel cardboard terminal; ensure tight crimps to avoid loose connections.

When should the 1.5 inch KSV copper voice coil be inspected or replaced?

Inspect the voice coil if distortion appears after extended high-power use; replace it if the coil rubs or reads open circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.