4XEM
4XEM 4XLIGHTNING3 Lightning to USB 2.0 cable 3 ft
A Lightning cable with USB 2.0 Type-A connector for charging and syncing iPhone, iPad and iPod, three feet long
- TypeLightning Cable
- Compatible Phone ManufacturerApple
- Length3 ft.
- Charges Apple devices via 8-pin Lightning connector
- Syncs data through USB 2.0 Type-A port
- 3 ft length suits desk or bedside use
- Certified cable ensures reliable iPhone iPad iPod connection
- Durable male-to-male design for everyday charging needs
Lightning cable for Apple devices
The 4XEM 4XLIGHTNING3 is a Lightning-to-USB 2.0 cable built for iPhone, iPad and iPod owners who need a direct wired link to a standard USB-A port. Its 3 ft length suits desktop charging, laptop syncing or in-car use without excess slack. The cable carries Apple MFi certification, confirming it meets the manufacturer’s electrical and mechanical requirements for safe communication with iOS devices. It is not intended for users who require USB-C connectivity or longer reach for wall outlets far from the point of use.
Passive copper construction
The cable uses passive copper conductors with no active electronics, so it draws only the power negotiated by the host and the connected device. Heat output remains negligible during typical charging or data sessions, and there are no fans, pumps or semiconductor junctions that could generate audible noise. Power delivery follows the USB 2.0 specification, limiting current to the levels supported by the host port and the Apple device’s own charge controller. No thermal throttling or active cooling considerations apply.
Certified connector ends
Each end carries a moulded strain-relief collar that reinforces the junction between cable and connector, reducing the risk of wire fatigue from repeated bending. The 8-pin Lightning plug and the USB-A plug are both fully moulded, so there are no removable shells or user-serviceable parts. The MFi certification mark on the packaging confirms the cable has passed Apple’s compliance tests for voltage regulation, signal integrity and mechanical durability. No additional adapters, driver software or configuration utilities are bundled or required.
Highlights
- Charges Apple devices via 8-pin Lightning connector
- Syncs data through USB 2.0 Type-A port
- 3 ft length suits desk or bedside use
- Certified cable ensures reliable iPhone iPad iPod connection
- Durable male-to-male design for everyday charging needs
Specifications
| Brand | 4XEM |
|---|---|
| Model | 4XLIGHTNING3 |
| Type | Lightning Cable |
| Compatible Phone Manufacturer | Apple |
| Length | 3 ft. |
| Shipping weight | 0.45 kg |
| Package size | 152 × 127 × 23 mm |
Questions about this item
How do I plug the 8-pin Lightning and USB 2.0 Type-A connectors in the right orientation?
Align the Lightning connector so the metal contacts face the same way as the device port, then push straight in until it clicks; insert the USB 2.0 Type-A plug with the plastic tab facing down so it slides in without forcing.
Will the Lightning contacts or USB 2.0 plug wear out and need replacement?
The gold-plated Lightning contacts resist corrosion, but debris in the device port can accelerate wear; the USB 2.0 Type-A plug is rated for thousands of cycles and only needs replacement if the spring tabs bend or the housing cracks.
What limits the cable during a long sync of photos or videos?
The USB 2.0 Type-A interface sets the maximum transfer rate, so extended photo or video syncs will run at that speed ceiling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
