We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six-foot DVI-D dual-link cable with 19-pin male connectors on both ends, nickel-plated, PVC jacket

4XEM

4XEM 4XDVIDMM6FT 6 ft DVI-D dual link male-to-male dvi cable

SKU CH-CWVK-04BYK MPN 4XDVIDMM6FT

A 6 ft DVI-D dual-link cable with 19-pin male connectors on both ends, copper conductors and nickel-plated contacts for a 9.9 Gbit/s digital video link

  • TypeDVI Cables
  • Cable Length6 ft.
  • Connector Number2
  • Connector DetailConnector on First End: 1 x 19-pin DVI Male Digital Video Co
  • Terminal GenderMale to Male
  • ShieldingYes
  • Supports up to 9.9 Gbits per second with dual-link DVI-D
  • Nickel-plated connectors reduce signal loss for a clearer picture
  • 28 AWG copper conductors deliver dependable performance
  • Aluminium Mylar foil shielding protects against interference
  • 6 ft length suits typical monitor and video device setups

6 ft DVI-D dual-link cable

This 6 ft DVI-D dual-link cable carries digital video between monitors, projectors or legacy players. Two 19-pin male connectors plug directly into compatible ports without adapters. Shielded copper conductors and nickel-plated contacts preserve signal integrity over the full length. It suits offices and home setups that still rely on DVI-D dual-link outputs.

Shielding and conductor materials

Aluminium Mylar foil wraps the 28 AWG copper conductors to block electromagnetic interference. The PVC jacket protects the cable during routing behind desks or through trunking. Passive construction draws no external power and adds no audible noise. Signal loss stays low thanks to the nickel-plated connectors and quality shielding.

Dual-link bandwidth for high resolutions

The dual-link design supports a digital interface up to 9.9 Gbits per second, enabling higher resolutions than single-link cables. Nickel-plated contacts resist corrosion for a stable connection over time. No software or drivers are required; the cable works immediately on any device with a DVI-D dual-link port. It does not carry audio or convert to other video standards.

Highlights

  • Supports up to 9.9 Gbits per second with dual-link DVI-D
  • Nickel-plated connectors reduce signal loss for a clearer picture
  • 28 AWG copper conductors deliver dependable performance
  • Aluminium Mylar foil shielding protects against interference
  • 6 ft length suits typical monitor and video device setups

Specifications

Brand4xem
Model4XDVIDMM6FT
TypeDVI Cables
Cable Length6 ft.
Connector Number2
Connector DetailConnector on First End: 1 x 19-pin DVI Male Digital Video
Connector on Second End: 1 x 19-pin DVI Male Digital Video
Terminal GenderMale to Male
ShieldingYes
ConductorCopper Conductor
SpecificationsPlating: Nickel-plated Connectors
Device Supported: Monitor, Video Device
Material: Aluminum Mylar Foil - Shielding, Polyvinyl Chloride (PVC) - Jacket
Shipping weight0.10 kg
Package size216 × 127 × 25 mm

Questions about this item

How do I install the 19-pin DVI-D dual-link connectors on this 6 ft cable, and what step do people often get wrong?

Align the 19-pin DVI-D male connectors with the ports on your monitor and video device, then secure each side using the built-in thumbscrews; the step often missed is tightening both screws evenly to prevent signal loss from a loose fit.

What maintenance or replacement will this DVI-D dual-link cable need over its lifetime?

The 28 AWG copper conductors and nickel-plated 19-pin connectors are designed for long-term use; inspect the PVC jacket and aluminum Mylar foil shielding periodically for physical damage, and replace the cable only if the connectors become bent or the jacket shows cuts.

What is the first limit that appears when running this cable at its maximum 9.9 Gbits per second data rate for extended periods?

The 9.9 Gbits per second digital interface rating is the primary sustained-use limit; signal integrity depends on the 28 AWG copper conductors and dual-link 19-pin design maintaining that bandwidth without degradation over the 6 ft length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.