We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four white 0.5 metre RGB LED extension cables with 4 pin connectors and extra male plugs

4pcs White 0.5M 1.64ft RGB LED Strip Extension Cable 4 Pin Connector 10mm 5050 3528 2835

SKU CH-GF8S-F7D8N

A set of four 0.5 m solderless extension cables with male-to-male 4-pin plugs to connect 10 mm RGB LED strips to controllers or link strips together

  • Sports TeamSan Francisco 49ers
  • Commercial/ResidentialLow Voltage
  • Extend RGB strips to ideal locations with .5 m cable
  • Connect multiple 5050, 3528 or 2835 strips using 4-pin plugs
  • Solderless installation via pre-soldered female connectors and male plugs
  • Flexible, durable PVC insulation with stranded pure copper wires
  • Low-voltage design suited for automotive and residential use

0.5 m 4-pin RGB LED extension kit

Four 0.5-metre cables with pre-soldered female connectors and eight male 4-pin plugs extend the link between a controller and 10 mm 5050, 3528 or 2835 RGB strips or join strips together. The solderless design lets installers route lighting to preferred locations without a soldering iron.

Low-voltage 4-pin RGB interface

The cables carry only the four channels required by standard 5050, 3528 and 2835 strips, so they cannot address individually addressable LEDs or carry data protocols beyond basic RGB control. Voltage drop over longer runs is not mitigated by these short leads.

Stranded copper with PVC insulation

Pure copper strands inside flexible PVC sheathing withstand repeated bending during installation and re-routing. Snug-fitting connectors stay seated on 10 mm strip contacts, and the included male-to-male plugs allow quick reconfiguration without cutting or soldering.

Highlights

  • Extend RGB strips to ideal locations with .5 m cable
  • Connect multiple 5050, 3528 or 2835 strips using 4-pin plugs
  • Solderless installation via pre-soldered female connectors and male plugs
  • Flexible, durable PVC insulation with stranded pure copper wires
  • Low-voltage design suited for automotive and residential use

Specifications

Sports TeamSan Francisco 49ers
Commercial/ResidentialLow Voltage

Questions about this item

How do I pick the right cable length for my LED strip run?

Each cable is 0.5 m (1.64 ft) long; buy enough four-piece packs so the total length reaches from your controller to the furthest strip section.

What does the 10 mm width spec mean when I plug the cable in?

The connectors are moulded for 10 mm wide 5050, 3528 or 2835 RGB strips, so they seat securely without soldering.

What does the 4-pin connector actually carry in a low-voltage RGB circuit?

The four pins pass the common positive line and separate red, green and blue returns, letting a standard RGB controller drive colour changes across the extension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.