We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four black 0.5m RGB extension cables with 4-pin connectors for 10mm LED strips

4pcs 0.5M 1.64ft 4 Pin RGB LED Extension Cable 10mm 5050 3528 2835

SKU CH-W0QB-C8YSD

Set of four 0.5 m solderless 4-pin cables that extend 10 mm RGB strips (5050, 3528, 2835) between controller and lights or between strips, with eight male plugs included

  • Sports TeamSan Francisco 49ers
  • Standards/CertificationsUL Listed/CSA Certified
  • Commercial/Residentialindoor, Data Transfer
  • Extends RGB strips 0.5 m without soldering
  • Pre-soldered 4-pin connectors plug straight into 10 mm tape
  • Stranded pure-copper cores handle repeated flexing
  • UL listed and CSA certified for indoor use
  • Pack includes four cables plus eight male-to-male plugs

Extension cables for 10 mm RGB strips

Four 0.5 m cables with 4-pin connectors let you bridge the gap between a controller and 5050, 3528 or 2835 LED strips, or join multiple strips together. Pre-soldered female ends and eight included male-to-male plugs make every connection solderless. The kit suits installers who need to route strips around corners or across ceiling gaps without cutting and re-soldering each run.

Sustained flexibility and conductivity

Stranded pure-copper conductors inside PVC insulation resist work-hardening when the strip is bent repeatedly during installation or later adjustment. UL Listed and CSA Certified materials meet indoor wiring standards, so the cables maintain consistent current delivery over long runs without overheating. The connectors seat firmly, preventing intermittent flicker that can appear when loose plugs vibrate loose over time.

Durable PVC jacket and snug connectors

High-quality PVC resists abrasion and corrosion in typical indoor environments, while the 10 mm width matches standard strip profiles for clean routing in channels or behind cornices. Eight extra male plugs allow future reconfiguration without hunting for spare parts. Buyers who need weather-sealed outdoor runs or strips wider than 10 mm should look elsewhere.

Highlights

  • Extends RGB strips 0.5 m without soldering
  • Pre-soldered 4-pin connectors plug straight into 10 mm tape
  • Stranded pure-copper cores handle repeated flexing
  • UL listed and CSA certified for indoor use
  • Pack includes four cables plus eight male-to-male plugs

Specifications

Sports TeamSan Francisco 49ers
Standards/CertificationsUL Listed/CSA Certified
Commercial/Residentialindoor, Data Transfer

Questions about this item

Does the 0.5M cable run warm when the 5050 RGB strips are on all day?

The extension uses four stranded copper conductors inside PVC insulation; it carries only the low-voltage signal from the controller to the strip, so it stays cool during continuous use.

What must I already have to use these 4-pin connectors with a 10mm SMD 3528 strip?

You need a compatible 4-pin RGB controller or power supply and a 10mm wide 3528/5050/2835 LED strip with matching 4-pin pads.

Will the supplied male-to-male plugs fit the 4-pin sockets on my older 2835 RGB strips?

Yes, the 4-pin male plugs are designed for the standard 10mm RGB connector used on 2835, 3528 and 5050 strips, so they snap straight in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.