3M
3M X62w Projector Lamp 165W 2000 Hrs
Replacement projector lamp module with 165W Philips UHB bulb and housing, rated for 2000 hours
- TypeProjector Lamp
- Wattage165W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled housing
- 165 watt Philips UHB bulb powers bright projection
- 2,000 hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with 3M X62w projector models
3M X62w Replacement Lamp
This 3M X62w module is a new projector lamp assembly that includes a 165W Philips UHB bulb pre-fitted in its housing. It is intended for users who need a direct, ready-to-install replacement for a spent lamp in a compatible 3M projector. The unit arrives fully assembled so no separate bulb handling is required.
165W Philips UHB Bulb
The lamp uses a 165W Philips UHB bulb rated for 2000 hours of operation. That wattage and rated life are the primary specifications that determine whether this module matches the original equipment requirements for the projector.
Fits Compatible 3M Projectors
The module is built to OEM dimensions and connection layout for the X62w designation, allowing it to seat directly in the projector's lamp compartment without adapters. Buyers whose projector calls for a different lamp code or a higher rated life will need a different module.
Highlights
- Ready to install with pre-assembled housing
- 165 watt Philips UHB bulb powers bright projection
- 2,000 hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Compatible with 3M X62w projector models
Specifications
| Brand | 3M |
|---|---|
| Type | Projector Lamp |
| Wattage | 165W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What does the 165W rating mean for brightness and heat once the lamp is running in the projector?
The 165W rating is the power the UHB bulb draws when lit; it determines the light output the projector was designed for and the amount of heat the cooling system must handle.
What interface or standard does the lamp use to connect, and what does that cap in practice?
The lamp plugs into the projector's proprietary lamp connector, which carries the ignition voltage and operating current; the connector limits you to lamps built for the X62w housing.
What physical space and mounting points does the module need to fit in the projector?
The assembled bulb-and-housing unit matches the original X62w dimensions and screw locations, so it slides into the lamp compartment and secures with the existing latch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



