3M
3M SFTW-203-3/4-48-BLACK Heat Shrink Tube Thin Wall 3:1 Shrink Ratio
Thin-wall polyolefin tubing shrinks 3:1 to protect 4 AWG–3/0 AWG wires from −67 °F to 275 °F
- Thin-wall polyolefin shrinks to one-third original diameter for tight insulation
- 3:1 shrink ratio reduces 0.71 in. inside diameter to 0.24 in. after heating
- Operates from -67 °F to 275 °F in harsh environments
- Flame-retardant material resists acids and alkalis without adhesive lining
- Rated at 600 V dielectric strength with minimum shrink temperature of 212 °F
Heat Shrink Tube for 4 AWG to 3/0 AWG Wire
This 3M thin-wall polyolefin tubing shrinks at a 3:1 ratio to fit wire sizes from 4 AWG to 3/0 AWG. The black tubing measures 0.71 in before shrinking and 0.24 in after shrinking with a 0.03 in wall thickness. It operates from -67 to 275 degrees F and provides 600 V dielectric strength.
Upgrade from Lower-Ratio
A 3:1 shrink ratio covers a wider range of diameters than 2:1 alternatives, reducing the number of sizes kept in stock. The flame-retardant polyolefin material adds safety where standard PVC sleeving would not meet requirements. Minimum shrink temperature is 212 degrees F for reliable installation with common heat tools.
Suited for Electricians Needing Flexible
The tubing resists acid and alkali exposure while remaining very flexible for tight bends in automotive or industrial harnesses. Supplied in 4 ft individual pieces for single-cable jobs. Not suited for applications requiring adhesive-lined seals or diameters outside the 4 AWG to 3/0 AWG range.
Highlights
- Thin-wall polyolefin shrinks to one-third original diameter for tight insulation
- 3:1 shrink ratio reduces 0.71 in. inside diameter to 0.24 in. after heating
- Operates from -67 °F to 275 °F in harsh environments
- Flame-retardant material resists acids and alkalis without adhesive lining
- Rated at 600 V dielectric strength with minimum shrink temperature of 212 °F
Specifications
| Brand | 3M |
|---|
Questions about this item
Will the 0.71 in inner diameter fit over a 4 AWG wire?
Yes, the tubing shrinks from 0.71 in to 0.24 in and is rated for wire sizes from 4 AWG to 3/0 AWG.
What minimum temperature is needed to shrink the 3:1 ratio tubing?
Apply heat at or above 212 °F; the thin-wall polyolefin will shrink fully to the 0.24 in recovered diameter.
How often should the acid- and alkali-resistant tubing be inspected?
Inspect periodically for cuts or abrasion; the 0.03 in wall thickness and 600 V dielectric strength remain stable across the -67 °F to 275 °F range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
