We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear adhesive transfer tape roll on tartan liner, 36 yards, for ATG applicator

3M

3M Scotch ATG Tape 987 36 yds Clear Adhesive

SKU CH-0XBW-2KX6J

Clear permanent acrylic transfer tape bonds paper, card, fabric, foil, plastic and foam, resists UV and solvents, and operates from -60 °F to 250 °F

  • Craft TypeCraft Accessories
  • ColorClear
  • Permanent bond on paper, fabric and plastics
  • Good UV resistance protects outdoor or window displays
  • Withstands -60 °F to 250 °F for extreme environments
  • Medium-firm 3M Adhesive 400 gives strong initial grab
  • Reverse-wound on 1 in core for ATG applicators

Adhesive Transfer Tape 987

Scotch ATG Tape 987 is a permanent unsupported acrylic adhesive transfer film on a tartan liner. It is designed for general-purpose bonding of lighter materials such as paper, card stock, fabrics, foils, plastics and foam board. The tape works with a Scotch ATG applicator for quick application. It suits crafters, framers and light assembly tasks needing a clean, permanent bond.

Temperature range and durability

The adhesive system operates consistently from -60°F (-51°C) to 250°F (121°C). It provides good UV resistance and good solvent resistance for lasting bonds in varied environments. High initial adhesion combines with strong holding power across this temperature span. The formulation is engineered for reliable performance in both cold and hot conditions.

Reverse-wound roll on 1-inch core

The roll is reverse wound on a unique 1-inch core made for Scotch ATG applicators. This mounting style enables fast, liner-free dispensing during repetitive tasks. The 36-yard length supports extended use before roll changes. Users without a compatible ATG applicator cannot apply this tape as intended.

Highlights

  • Permanent bond on paper, fabric and plastics
  • Good UV resistance protects outdoor or window displays
  • Withstands -60 °F to 250 °F for extreme environments
  • Medium-firm 3M Adhesive 400 gives strong initial grab
  • Reverse-wound on 1 in core for ATG applicators

Specifications

Craft TypeCraft Accessories
ColorClear

Questions about this item

How do I load the 36-yard roll onto the ATG applicator without the liner tearing?

The roll is reverse-wound on a one-inch core. Feed the liner so it peels from the bottom of the roll and threads through the applicator's guide slot; pulling from the top causes the liner to snag and tear.

Will the acrylic adhesive dry out or need replacing after a few years?

The 3M Adhesive 400 formulation remains stable from minus 60°F to 250°F and resists UV and solvents, so the tape does not dry out; only the liner is consumed during application.

At what temperature does the bond start to fail during continuous outdoor exposure?

The adhesive is rated to 250°F (121°C); sustained heat above that limit softens the acrylic and reduces holding power before UV degradation becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.